Search results

REAR REMOTES!!!!!!! At least 1, if you're going to want TnT get 2. Mine had 1 and I wish I had 2. Rear remotes is like complaining about too big of tractor, nobody ever says they wish they hadn't got the rear remotes!

Try these https://youtube.com/shorts/_Te2eBRvvSM?feature=share I taped string between the levers to show that they are not moving. https://youtube.com/shorts/Sz_XH8TUlk4?feature=share You can see the pins retracting and the HLA frame/carrier pulling away. I'm not sure if this is an HLA...

Great work for keeping the levers down. Just so you're aware the lock pins can still move without the levers moving. Here's a thread where I noticed it. There is a welded nub above the lock bolt that in theory should keep the lock pin from retracting enough to disengage without the handles...

I have an 18" tooth bucket and a 16" flat face. I've only used the tooth bucket as the 16" just arrived after 10 months. I have a lot of clay. I run the tractor at near WOT or WOT when I'm using the BH. I also spend a little time in the spring digging along the back of my property, for practice...

I don't know the answer to that, it might be in the WSM? I've had a great experience with my BH92, it is not a dedicated TLB or a mini, but it's done everything I've wanted it to do.

Kubota TL here. There’s no check valve and I noticed this winter with 1,000lbs of ballast box on it will eventually leak down towards a rear pitch angle. No biggie I just bump it up to level once in awhile. It works great with the LP and let’s me adjust the cut without leaving the cab. I also...

Here’s my side shot and pics of the mounts.

Assuming the dealer used the spacers. I've gotten used to backing up hills that are steep. I haven't had any problems but I have noticed if I have forks on the FEL instead of the HD bucket w cutting bar, I'm too light on the front and it tends to move too much when using the BH. Kubotafreak...

Get at least one set of rear remotes. Two would be better as you can get a TnT installed

Try Courtney. He has some stock. I bought a Dirt Dog tiller from him last fall. It’s a good unit. https://www.goodworkstractors.com/

I think Paul Short did one in one of his videos if that helps. If you have a BH on though if I remember correctly, it won’t fit. I move my BH seat to the alternate mounting holes to give me more leg room, so it’s even tighter access now at back of cab. I’ll be following this thread though...

If you’re going to use Kubota financing consider ordering the BH even though it might take a bit to get it. I think the pricing is better to purchase up front. I have the BH92 w QA bucket (18” and 16” flat face), mechanical thumb. The BH is a beast for a tractor unit IMO. I have the GL4060 and I...

Get ahold of this company in Findlay OH they make custom buckets. I “heard” that they were contracted to make Kubota buckets at one time. Information I have not verified. https://werk-brau.com/

…and we’re not advocating the safety of basket use. I have chains at each bottom edge back to the fork frame and ratchet strap at the top. Before doing this I spent some time practicing simultaneous dual function, curl or dump at same time as lifting or lowering. You have to work at keeping the...

Welcome to OTT Kim. My wife operates and I get the shovel - we switch when using the basket.

Kubota grease for tractors and Icon suspension on truck. Lucas for attachments, trailers, axles etc. If I could start over I’d probably use Lucas HD Mining & Construction and ditch the Kubota grease. The Kubota grease is way to loose IMO when the weather is warm. I tend to overgrease so that...

I saw leak down and check valve in Henro’s post, so thought I’d chime in. :)

https://www.agristoreusa.com/collections/category-1-hydraulic-top-links ‘These have the check valves. My Kubota top link is smooth on sides and does not, hence it leaks down so you want to keep that in mind.

I agree to be cautious but I will say that I take my empty UDT2 jug to my Kubota dealer and he fills from his 55 gallon UDT2 system for me. Doesn’t charge me. I stand and watch while the tech does it. I try to remember to write the date it was filled on it. Nice, but I’m sure he more than makes...

Moved the Trinity workbenches today to empty the PF garage for interior finishing in the next couple of weeks. Had cabinets stacked 3 high but can only stack 2 high in house garage. I think it’s the first time I’ve operated in L gear - didn’t want to dump the upper stack on “pugota”. I figure...