Search results

  1. V

    Where to purchase implements?

    I have bought them from everywhere. Have to do your homework and buy the heaviest one, thicker metal is usually better.
  2. V

    Kubota L3200 gear drive advice

    I would have to check each one out, so many variables to look at.
  3. V

    Kubota L3200 gear drive advice

    If the price is right and you or a mechanic can be comfortable with its condition. I had a 1970 JD that ran great and still does, just the usual maintenance upkeep.
  4. V

    Replacement Cylinder Head

    Yes, to do the valves yourself. You would probably need to purchase a kit with the guides in it, but it's really not that tough to do. I'm sure you can find plenty on YouTube to show how.
  5. V

    Replacement Cylinder Head

    Cost me a $150 to have a machine shop mill and magnaflux my head, I lath my valves and use an OEM head gasket. That has to be cheaper and better than what you're looking at.
  6. V

    Fixing hole in side of block

    Its only time before somebody will need a part you have laying there, and you will be able to recoup some of your costs.
  7. V

    Loss of power

    Possible fuel issue, start with your filters.
  8. V

    Want a new tractor. Looking for suggestions.

    Be careful/slow to get rid of your existing tractors, if it is like around here, I made sure some appreciative good neighbors got a good deal.
  9. V

    Fixing hole in side of block

    I really do hope he gets many hours of use out of it.
  10. V

    Fixing hole in side of block

    When I rebuild stuff I might run it for 5 seconds. Why take that chance? I wasn't impressed with the oiling of the parts in the first place. Like you were waiting for it to seize.
  11. V

    Broke lift arm turnbuckle stabilizer on my L275DT- what to replace assembly with?

    If you can break it free weld it, at least for a backup.
  12. V

    Clean Water

    I put in a whole house RO system for $5000, good for 1gpm 30 years ago. Did not work as well as I would have liked, so I had to threaten legal action to get $3000 back. For years now I just have a $250 RO, with built in auxiliary pump, good for over 50 gpd. Be aware of the wastewater, could be...
  13. V

    Fixing hole in side of block

    Joe, if the pistons went in comfortably tight, your valves are adjusted, and that was a wet test, it sounds like your valves are not seated adequately. You need to get the compression within 10% of each other. You put in new valve guides?
  14. V

    BH92 Backhoe Stabilizer Arm Droop

    Don't worry about it, just chain them up together, just remember the chain.
  15. V

    Hydraulic Fluid Check on a L4802

    Try putting the appropriate outrigger down to see if you can get the fluid level to move so you can see it. Side to side or front to back.
  16. V

    Boom cylinder rebuild

    Take your parts or old seals to a hydraulic shop and they can measure them and give you the correct seals for half the price
  17. V

    Fixing hole in side of block

    2 of the valves looked different than the others.:unsure:
  18. V

    Opinion on used L4701

    Gears are good for plowing and brush hog/field work, HST is best for all the rest, snow removal, FEL work, ect. I have had both and HST is nicer. If you have acreage to do you will probably want a 6' Brush Hog. Now is that a good deal? Seems high, I shopped for over a year before I bought and...
  19. V

    No regen yet

    Just curious, my L47 has a display screen that lets me know what percentage I'm at so I can anticipate the regen timing, does yours?
  20. V

    Pump for 5 gallon hydraulic fluid cans. Anyone recommend one.

    How about that cheap HF hand Transfer pump. I believe Mine was around $10 on sale.
Top Bottom