Search results

This is not my tractor but it is a B6000. Note that there are no vents coming off the valve cover. Sent from my DROIDX using Tapatalk

This is the vent in the side of the injector pump. Sent from my DROIDX using Tapatalk

There is no vent coming off the valve cover. i don't know but i will post a pic this afternoon. Im at drill right now. Ill see if i can find a pic on the net and circle what im talking about! Sent from my DROIDX using Tapatalk

Ok i got it fixed this afternoon when i got home. Sorry for the delay but UFC comes before anything so been busy lol. What i found: that vent tube coming of the injector pump or what i would call a fuel control (sorry that's what we call them on aircraft) was stopped up with by a dirt...

Like a pcv system on a car i assume. I'll check when i get home. Thanks guys! Sent from my DROIDX using Tapatalk

That's the vent off the injector pump right? Sent from my DROIDX using Tapatalk

Ok my B6000 seems to have some major blowby or my vent tube is clogged up. Shut her down yesterday and went to check the oil and when i pulled the dip stick it had a bunch of pressure release. And my rear main seal is leaking from out of the bell housing. Could this be caused from the...

I've been looking on here trying to find the correct front and rear tire diameter but i think its just confusing me even more. I think 6-12 front and 7-16 rear are the original sizes. So from what I've figured those diameters are 23" front and 29" rear. Is this correct or even close?

Where did you find your pivot pins and bushings to attach arms? Having problems finding a supplier. Sent from my DROIDX using Tapatalk

Ok that helps a lot then. There is no way mine weighs close to that lol. Reason i say this is cause i'm only 160 lbs and can pick up both ends of it including the 3 point end. I've got the manual for the kubota 619 hoe and its identical to it as far as looks. I keep looking at the pics i...

Bulldog, Do you know the weight of your backhoe? Sent from my DROIDX using Tapatalk

Tractor was taking forever to start when cold so i changed the glowplugs. Well went to check and make sure i was getting power to the new ones after install and after poking around with the old multimeter i found out this. Glow plug switch runs headlights and glow plugs only get power when...

Guess I'll just go with a PTO pump for the backhoe. And add another 3 gal for the loader. Now just gotta figure out the best way to do that. Guess nobody has ever done this before. Thank you for your reply! Sent from my DROIDX using Tapatalk

That sounds logical. Hope that solves the problem. Let us know if it gets any better.

I have a pump on it like you do but it doesn't put out enough volume for what im needing. Stock only puts out about 3 gpm. Im needing about 12 to 14 gpm. Thank u though

Im not a tractor mechanic and have only worked on a hand full of em. But i am an aircraft mechanic and can offer a little advice but aircraft can be a little more complex so i could be wrong lol. If it only creeps an inch or so i would say its maybe a check valve staying open till it gets...

I want it for a FEL i'm building and to have remote hyd for the back. Sent from my DROIDX using Tapatalk

anyone knowledgeable on the best way to add auxiliary hyd to a b6000 from the front of engine. Not wanting to go with PTO driven pump. Please be descriptive as possible as far as pumps and pulleys. Thanks much

I've seen some on here that guys have fabricated and im gonna go a similar route with just bigger main post for the loader. Thinking 4x4 tube 1/4 thick and arms 2x4 tube 1/8 thick with a 48" bucket. Sent from my DROIDX using Tapatalk

Yes it has a hook up for what looks to be remote but it also has a froze up PTO pump with a tank and has a place to mount it. Its a kioti KB1200. Can't find any info on it though. Also im gonna build a FEL for it to. So i can make it hefty if ya know what im saying. Its just a project not...