Search results

I just discovered another problem when I tried to hook up the 48" bush hog today and the bush hog was not stay on. It is slowly downed to the ground. I review other thread that needs to change o ring in the rockshaft housing and ram cylinder. Dose anybody know which rubber ring need to replace...

Once Installed the steering gear box , shift and wheel, it is noticed the hood is shaking and made lot of noise. Discovered the rubber ring is missing. call local kubota dealer and the price is $60 for the rubber ring. I made own with heavy duty fuel hose.[ It is better than oem ring. and no...

I got the reverse gear from Cyprus that Bill told me. The installation was not bad as long as I could access through the steering gear box hole. Arrange of forks was not bad as thought. Just position the Hi Lo lever to the middle(neutral) then make all gears are free to turn(no engagement ) then...

I am so glad having so much rain this year in northern California where has been 5 years drought. Hope no more to say drought. little more progress in rainy day here beside reverse gear. 1} replaced pto seal, head lamp bulb, horn, touch up paint. 2) hour meter fixed(the tip was broken in the...

Fortunately, the seller recognized sent wrong gear and accept return it for refund. I will order it through the site that you meant because it is OEM gear. will update. Thank you again Bill and wolfman.

Bill. I should ask you before order it. Thank you so much for your expertise. John

Thank you so much for pictures. That gear size is same as my existing gear. I like to know where you got it? Thank you

It is came from Canada through the ebay. The gear description is One New Aftermarket Replacement Kubota Reverse Gear for L Series Tractor models: L1500, L175. 28 Tooth Gear OEM Part #'s 34150-23130, 34150-23133, 34159-23100

Finally, received the reverse gear. But it is 9/16" longer than existing. Any members in here can verify it is ok to install it? Thank you jkk

Thank you Much appreciated

Hi, Adam 12. glad to see your thread I bought same tractor 10days ago. It is runs good except reverse function and steering. so having so much questions on this little tractor same as you. I am replacing reverse gear and complete steering assembly in a month. Hope we can share some...

Hi, wolfman, How many transmission fluid drain plugs are and where? I found one buttom of left foot bracket. and two on the each axle house. Thanks john

Thank you for reply. Yes, it is. I thought the balls are on outside rails. will update with pictures once reverse gear installed. Thank you again. John

Thank you for replying. Probably they were missing long time ago. Do you have any picture for locating the balls on the rails?(attached picture) Also, do you have any easy way the forks back on the gears then set top plate on? Thank you John

It is another frustration.:confused::confused: Probably lost them long time ago. Is it necessary to be on the rails? And do you have any picture for locating the balls? Also, do you have any easy way the forks back on the gears then set top plate on? It is small world. Somerset is about 10...

Hi, Bill. Thank you for replying. Other confusion that it bring up is when I removed top cover, no interlock balls on the rails. But the l175 service manual described (according this site say it is same as l1500) Do you know originally the l1500 model has inter lock balls? Thank you ps. I...

Hello, Wolfman, I am newbie at this site and purchased l1500 recently. Removed the reverse gear. It was much much easier to remove it through the steering assembly box hole that need to replace anyway. I am wondering how to rearrange the shift forks after replace reverse gear. Anyway it can be...

Hello, I am newbie at this wonderful site for gary market kubota little tractors. I have read so much information for l1500 that obtained recently. It is very good condition except reverse function and steering assembly that needs to be replaced. As you see the pictures, the reverse gear is bad...