Search results

Any way to put the friction pads and plates in the wrong place/order? Changing gears with the RPMs too high? Changing gears before the tractor stops moving? Maybe the pads are not completely disengaging when cold because some of those internal parts can be lubed or coated with a preservation oil...

That should take care of any old parts you might had sticking. Little more adjustment then?

I think he was asking where'd the part come from.

Not the clutch faces themselves. The springs and plate might be about it. Could be binding in one.

Thinking backwards, no lube or wrong lube, or just barely out of adjustment. Sorry nothing more direct, been a little bit since the last time I touched the cluch on mine.

You have a valve stim tappet floating around in there too.

True, it was 13 this past week though.

I did consider this. I drained the fuel and filled it from a more recent batch of fuel I've gotten. Same thing, and all the same fuel has been burning in all my other equipment. Still going to get more now just to make sure about quality of my stock.

I couldn't find a place to post about odd ball equipment so here we go. What I have is a Chinese generator with a 186FA 418 diesel engine. When I first got it the generator head was inop and I replaced it but doing so i had to install a different crankshaft to match the replacement gen assy I...

Floppy stop knobs at the panel are normal as long as the other end is still connected with a pin and cotter key. You could add a grommet to the panel to tighten it up. Alot of folks may have stepped on the knob getting on and off bending it down more than normal. I melted of my fan blades with a...

G2001 is correct

Absolutely correct about those battery connections in post 3. That was an example of a front battery install. Great idea not so great execution. Correctly potted / molded cables are always best.

Not rear behind the radiator (original location) but behind the rear axle. See link below. https://www.orangetractortalks.com/forums/threads/g5200-battery-tray.60164/ https://www.orangetractortalks.com/forums/threads/kubota-wsm-g3200-g4200-g4200h-g5200.62276/

The size battery depends what you can stuff in it without it overheating. Some have front mounted batteries and some have rear mounted batteries. Mine is still in the stock location because I don't have temp problems with the size installed. I've attached some pictures of a front mount, others...

Older than the rest of my projects.

Looks ok for my old Ford.

What store you find it in?

Last 175 I had one of the shift forks broke and it hang in the gear set that was floating back and forth. As said pull the cover, drain the oil if you have to, and do not lose any balls or springs!

Just acquired another T1600 and this one is minty fresh. Just over 350 hrs and supper clean. The brakes were stuck but bow all good. Super nice. The seat is really the only thing that is worn out on the top.