LX 2610 Service

[Orange man hero]

Doing my first maintenance oil and tranmision change. Are there 1 or 2 filters?






First Service 189 hours. Can you use an air compressor type pump to take out the oil? What is the lower/smaller opening on the engine (says oil like the higher up one) On the hydro side of things, are the drains different than the ones in the owners service manual (seems so) Are there 2 filters?

 

[cthomas]

Here is the WSM for you.

Kubota LX2610 WSM.pdf

drive.google.com

 

[cthomas]

3 filters for fluid, 1 is engine oil, 1 is HST(Transmission) and the other is Hydraulic. Post a message if the google drive link worked.

 

[imnukensc]

Your owner's manual will have all that information and with pictures, too!

 

[Orange man hero]

Your owner's manual will have all that information and with pictures, too!

I'm a mechanic and the kb one is poorly done!

 

[Orange man hero]

Here is the WSM for you.

Kubota LX2610 WSM.pdf

drive.google.com

Thanks,,,better than the owners manual I have,,,takes forever to load though.

 

[Orange man hero]

Thanks,,,better than the owners manual I have,,,takes forever to load though. Where can I buy one of these in paper?

 

[RMS]

I had staples printout the pdf. It was cheaper than what the dealership charges for a hard copy.

 

[Orange man hero]

I had staples printout the pdf. It was cheaper than what the dealership charges for a hard copy.

Just might try that!

 

[cthomas]

I just printed it out at work. Then used the 3 hole punch, and borrowed a 3 ring binder.

 

[imnukensc]

I'm a mechanic and the kb one is poorly done!

I'm glad you're not working on anything I own.

 

[DustyRusty]

The thread title says BX and someone posted a manual for a LX. Now I am totally confused. I hate when threads turn into alphabet soup.

 

[cthomas]

I looked at what the op owns and just figured that he/her wanted the WSM for what they own. As he/she is asking about the first service it is highly unlikely it is on a BX2610. Oh, and I just google it and Kubota did not make a BX2610.

 

[Orange man hero]

I'm glad you're not working on anything I own.

I just printed it out at work. Then used the 3 hole punch, and borrowed a 3 ring binder.

Yes, big difference between net netters and real mechanics, just look at u-tube. I want one w/photos which the cheapie print-out which does not have photos from what I hear.

I looked at what the op owns and just figured that he/her wanted the WSM for what they own. As he/she is asking about the first service it is highly unlikely it is on a BX2610. Oh, and I just google it and Kubota did not make a BX2610.

Sorry lX and don't use it alot.

 

[Orange man hero]

The thread title says BX and someone posted a manual for a LX. Now I am totally confused. I hate when threads turn into alphabet soup.

Sorry LX

 

[Orange man hero]

I'm glad you're not working on anything I own.

You probably designed that OM

 

[Orange man hero]

HERE IS THE PRINT-OUT showing the "hose" or tube.

 

[Fordtech86]

HERE IS THE PRINT-OUT showing the "hose" or tube.

isn’t that showing the transmission drain plug and the two plugs in the rear axle case?

 

[imnukensc]

isn’t that showing the transmission drain plug and the two plugs in the rear axle case?

Yes, it is. Apparently the OP can only look at pictures, but neither read their captions or the instructions that go along with them. As he said earlier, he's "a mechanic." And I said, "I'm glad you're not working on anything I own."

 

[Orange man hero]

Yes, it is. Apparently the OP can only look at pictures, but neither read their captions or the instructions that go along with them. As he said earlier, he's "a mechanic." And I said, "I'm glad you're not working on anything I own."

Many report this manual as suspect in many ways, Did they pay YOU to write it, China wages.