Ordered a flail mower.

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
Just received word that the Del Morino Centurion Super 158 has shipped! Not sure of the delivery date yet but it shouldn't be much more than a week from MI to MT.
 
  • Like
Reactions: 1 users

Dieseldonato

Well-known member

Equipment
B7510 hydro, yanmar ym146, cub cadet 1450, 582,782
Mar 15, 2022
728
439
63
Pa
Very interested to hear your thoughts on it after you've had some run time.
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
Very interested to hear your thoughts on it after you've had some run time.
I thought spring was here so removed the snow blower and front blade weeks ago .... and then woke up to this!!! If I had two tractors I could have left the MX set up for winter. :unsure: This moisture will no doubt be good for the grass but it might be a few weeks before I get to try out the flail mower but will certainly report back.

01.jpg
 
  • Like
Reactions: 1 user

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
The Del Morino arrived at the receiving depot in town and is scheduled for delivery this Wednesday, but this is what I woke up to this morning. 2" to 3" of snow and elk all around the house. This weather is all over the place so it might be a few weeks before I cut anything, although there's some woody stuff that I might have a go at.

elk_01.jpg


elk_02.jpg
 
  • Like
Reactions: 2 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
About 50ft from the kitchen window ... watching elk never gets old.

elk_03.jpg
 
  • Like
  • Love
Reactions: 4 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
Looking up towards my place from my neighbors house this morning. His young girls were very excited to see the elk.

elk_04.jpg
 
  • Like
Reactions: 1 user

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
I was wondering about that. I may end keeping both, it just depends on how well the flail mower works on my property.

I ordered a Del Morino Centurion Super 158. I like the offset feature and the ability to cut embankments which is another feature I can really use. There are lots of area I can't cut with the rotary cutter. Total weight is supposedly 820lb and I opted for the hammers rather than the Y blades. I figure that the hammers will hold up better to the conditions I typically encounter.

View attachment 77009

View attachment 77010

View attachment 77011
What is with the UGLY green paint on those machines?
Are those things called tractors?;)
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
Hamilton valley?
I'm about 2-1/2 hours north of Hamilton. That's a really nice area though. I like Hamilton, but then again I like a lot of places in this part of the world.
 

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
I'm about 2-1/2 hours north of Hamilton. That's a really nice area though. I like Hamilton, but then again I like a lot of places in this part of the world.
Been to Montana a few times,...... and Alaska too .
If I were a LOT younger,..... it would be a close race!
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
I picked up the Del Morino Centurion Super 158 flail today. The freight company couldn't deliver it since it was too awkward for them to handle with a pallet jack. I went over with the flatbed trailer and managed to get it home without incident.

I'll be honest and say that I'm more than a little disappointed with either Good Works Tractors and/or the freight company. I'm going to call Del Morino to find out how they ship their mowers to the US. My bet is that they're in a metal framed crate the way that Kubota ships things. The pallet and shipping was a joke and there's some cosmetic damage to the implement that I'll need to address. At the very least I need a can of touch up paint.

It was difficult getting the mower off the pallets, and even getting it off the trailer was a challenge. However, I managed to hook it up to the tractor sans the driveshaft and get the hoses set up such that the levers in the cab work the way I want them to. I install the Outback Wrap hose markers tomorrow. It's a quality implement for sure and I'm looking forward to running it on the MX6000 and/or M6060.

mx_del_morino_1.jpg


mx_del_morino_2.jpg


mx_del_morino_3.jpg
 
  • Like
Reactions: 2 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
Here's how the mower showed up before I touched anything. The driveshaft was loose and laying on the back of the cutter. You can see a bunch of paint worn off on the drive belt cover. There's other minor damage too but this is the worst of it.

del_morino_2.jpg


del_morino_1.jpg


del_morino_3.jpg
 
  • Wow
Reactions: 1 user

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
That's pretty disappointing to see on a brand new implement. Looks like it had a rough ride.
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
That's pretty disappointing to see on a brand new implement. Looks like it had a rough ride.
Unacceptable for an almost $7k implement.

I forgot to mention but the hydraulics are FAST on this mower.
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
Update:

I've gone back and forth with Courtney at Good Works Tractors and he's been very responsive and very apologetic for something that he didn't have much if any control over. I found some more damage in the form of a bent rod that the front shield flaps rotate on. Courtney will ship a new rod to me, find out what paint color I need to match the finish, and he gave me a 15% refund which I'm happy with.

As I told him, I would have paid an extra $500 to have the flail show up in perfect condition, but as it is, it's here and I'll correct the issues, use it and enjoy it.

Courtney is the owner of Good Works Tractors. I like his YouTube videos and he's a genuinely good guy. I'll do more business with him, no doubt about that.

dm_6.jpg


dm_7.jpg
 
  • Like
Reactions: 3 users

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
Update:

I've gone back and forth with Courtney at Good Works Tractors and he's been very responsive and very apologetic for something that he didn't have much if any control over. I found some more damage in the form of a bent rod that the front shield flaps rotate on. Courtney will ship a new rod to me, find out what paint color I need to match the finish, and he gave me a 15% refund which I'm happy with.

As I told him, I would have paid an extra $500 to have the flail show up in perfect condition, but as it is, it's here and I'll correct the issues, use it and enjoy it.

Courtney is the owner of Good Works Tractors. I like his YouTube videos and he's a genuinely good guy. I'll do more business with him, no doubt about that.

View attachment 78712

View attachment 78713
Glad to hear you came to a satisfactory resolution and that his offline personality matches his online image.
 
  • Like
Reactions: 1 user