B6000 problems maybe oil

[Kubota b6000]

Thank you Kubotasam. I will have a go at taking the dash of and poke around

 

[en_teng]

Thank you Kubotasam. I will have a go at taking the dash of and poke around

http://www.ebay.com/itm/NEW-KUBOTA-...POWER-UNITS-/181342903082?hash=item2a38e11b2a






if you have basics in using analog/ digital multitester test your ignition switch or smell it is burnt replace it..

 

[Kubota b6000]

http://www.ebay.com/itm/NEW-KUBOTA-...POWER-UNITS-/181342903082?hash=item2a38e11b2a

That one on ebay has 5 terminal mine has only 2. Does that make a difference?

In addition the wiring is really bad. Many broken or cut wires, purposely I think, Many wires need to be replaced.






if you have basics in using analog/ digital multitester test your ignition switch or smell it is burnt replace it..

Yes I do have one and I will get at it as soon as I figure out which wires to replace and/or the rectifier.

 

[backhoe66]

Does it turn over? if not is the PTO in the off position, if not turn it off.
Battery charged?

 

[North Idaho Wolfman]

Start following the wires from one point to another.

 

[Kubota b6000]

Does it turn over? if not is the PTO in the off position, if not turn it off.
Battery charged?

Yes I can jump the terminals on the starter and it turns over but does not start.
Yes the battery is charged.

 

[Kubota b6000]

Start following the wires from one point to another.

Thanks North Idaho Wolfman I have this diagram but there are a couple of symbols on it that confuse me, like the small arrow pointing towards what looks like a rectangle? There are 3 of them on the generator.

 

[Jim L.]

Old style of a connector symbol. The triangle is the male, and the box the female.

May be a bullet type of connector.

 

[North Idaho Wolfman]

Yep just like Jim said they are bullet connectors.

 

[Kubota b6000]

http://www.ebay.com/itm/NEW-KUBOTA-...POWER-UNITS-/181342903082?hash=item2a38e11b2a






if you have basics in using analog/ digital multitester test your ignition switch or smell it is burnt replace it..

Well I tested many wires and they all show 12 volts. I will check a few more things today but I get 12 volts across both terminals on the main switch. There are so many things cut or removed it is hard to find where the wires go.

 

[cbaker65]

Well I tested many wires and they all show 12 volts. I will check a few more things today but I get 12 volts across both terminals on the main switch. There are so many things cut or removed it is hard to find where the wires go.

I hate to ask,or say it,But have you checked the fuel system,an
water seperator?
Dont know if the tractors have them,but are mowers do...If so,
check for any relay switches or fusable links..

 

[Kubota b6000]

I hate to ask,or say it,But have you checked the fuel system,an
water seperator?
Dont know if the tractors have them,but are mowers do...If so,
check for any relay switches or fusable links..

Thanks cbaker65 But I do not see any fuel related on the Wiring Diagram

 

[cbaker65]

Thanks cbaker65 But I do not see any fuel related on the Wiring Diagram

Lol...yea I know,I just thought I would throw that in there!...