New profile posts

What's new New posts New media New media comments New profile posts Latest activity
L
There are 4 things I would like to fix on this T1760

1) Replace sealed bearings on the deck mower,
2) fix the throttle - the engine idles from normal to very slow and back to normal constantly when I am in fast mode. If I go to slow mode then it just stalls. Not sure I can tell much difference between Fast mode and full choke.,
3) The front axle is quite loose, now quite sure where to start with this,
4) the headlights do not work and there seems to be a couple of loose wires that need to go somewhere. There are wires to the light switch, but a "spare" red and a "spare" brown are just dangling around that area. The red has an end to fit someplace, but the brown needs an end to be added.
Thanks to all for any advise / help / information you can provide.
I have the Engine Service Manual for FD501V, Operators Manual for T1880 (it seems similar to T1760) and operators manual for T1770 (it also seems similar to the T1760 - this manual was given to me by my local Kubota dealer)
L
Hi My name is Louise. I have been widowed almost 5 years. I have a Kubota BX 25D with loader and shovel, and a T1760 Lawn Tractor. My husband purchased the BX25 new in 2012 and I purchased the T1760 used in May 2021.

I have learned how to operate the BX25 and am having fun exploring and learning new things. The T1760 is 22 years old and needs some work that I would like to figure out and do on my own.
PS I have never changed the oil in my car, nor changed a tire in my life. So I really am a novice.
Since getting this I have, removed a tire (it had a slow leak) and put the new one back on. Bought the sponges and put them on where they were missing, added a missing spring under the seat, replace the air filter, had the dealer replace the PTO belt, do an oil change, replace the fuel filter.
There are 4 things I would like to fix on this T1760. Since I am running out of my max 1000 characters – I will do a second post for the rest.
  • Like
Reactions: 1 user
ctfjr
Hello davidmem

I am right off 42 in Cheshire. If you do find a place to rent a 3 pt tiller please let me know. I have been wanting to redo our lawn and all the comments on OTT seem to indicate the tiller is the best implement to start with.

Jerry
M
Hello -- I saw your post about a large capacity alternator. I have seen a kit for my B2601 to take it from 14.5 AMP to 40 AMP. Do you know of a larger one? Thanks,

Mike
D
dirtydeed
It looks to me like the only one available for the B'01 series is the 40 amp. The 60 amp appears to only be available for the large B with cab (heat/AC).
J
I have a bx2360, 2 actually. One mows like a Ferrari, but the other looses power terribly when under a load since I got it 4 yrs ago. I’ve checked changed and cleaned from the tank to the governor. Where can I get info/video/advice on adjusting/repairing the governor? Engine is great, but I believe that has been “tinkered” with by the previous owner. HELP???!
G
I have a M5700 I purchased second hand. It's been a good tractor. Today while baling hay. I lost power to my baler. My power plug has no power. I can't locate the fuse panel. Where is it located?
A
trouble11, do you still have a bf350 loader? if so, would you like to sell it?
thanks
Alan
Vermont
C
Hi jdefonseka,
I just acquired a T1600H that has need of a new hydro or at least the front plate with input shaft. Where did you get yours? I found the cover at Coleman but the price is prohibitive. About $1400 I think.
Thanks
kubotafreak
kubotafreak
You will have better luck cross referencing the trans manufacturer. Hydrogear..
  • Like
Reactions: 1 user
C
Hello gypsy27333,
I'm located in Roanoke, VA and in need of t T1600 hydro and drive shaft if this machine is still available,
Thanks!
F
I have a FEL question on a 2001 BX2200 with the LA211. All has worked great for years until recently the control is beginning to feel looser. Age and use I'm sure. This is all about bucket roll. Nothing has been changed, disconnected and so forth. You roll the bucket down and forward and let go of the control lever and the bucket sometimes not all, will roll itself back and up by itself. Thereby dumping the firewood you just brought in neatly. Is there a detent, or spring in or around the spool that wears out? No leaks of any kind unless internal. If you pay close attention you can easily control it, but sometimes when you back up or are looking elsewhere for a second it does it's thing and makes a mess. I'm sure someone has had this happen, thoughts would be great, thank you.
D
Howdy-------I inherited a Kubota BX23 with loader and Backhoe from my father in law whom recently passed. I knew it was not working properly before he passed. It only pulls when it is in 4x4, and only pulls with the front wheels. when I press the differential lock it makes a ruff sound under me in the transmission. What could be broken? Will I need a whole new transmission? The front wheels pull just fine. Thanks for letting me join this group!
Top Bottom