Hello!, Quick question, would anyone know where to buy the carbide tips for the teeth? I'd rather tip them myself rather than pay 18 bucks for one tooth. Thanks!
Woodland Mills WG24 Stump Grinder
- Thread starter Reider
- Start date
I don't know oif this helps or would even work . I remember reading about Deeprock the diy well drilling kit maker used to sell cans of carbide that ya would heat up the drill bit till red hot & put in the carbide can & that recoated the drill bit & get back to drilling .
animal
animal
We use Kennametal for carbide inserts.
I looked at Woodland Mills website and they cost between 15-18 dollars each.
By the time you get the inserts and retip the ones you have it will probably be cheaper to just buy them already pre made.
I looked on eBay there are a couple sellers there as well.
I looked at Woodland Mills website and they cost between 15-18 dollars each.
By the time you get the inserts and retip the ones you have it will probably be cheaper to just buy them already pre made.
I looked on eBay there are a couple sellers there as well.
I found this. They list a couple different tips and complete cutters also. Not sure of the size of the shank and the square on the woodland Mills grinder teeth.
Ya, I found that aswell. lol. I'll have to do some hard digging. For now I guess i'll just have to keep buying the complete teeth/tip combo. Obviously Woodland mills would not let me know where they get them
NCL4701
Well-known member
Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
These folks advertise retipping for significantly less than cost of a whole tooth. https://www.wit-sonquality.com/services/
I researched the subject a while back, for what reason I don’t recall, and saved their info but I have not actually used them for retipping or anything else.
I researched the subject a while back, for what reason I don’t recall, and saved their info but I have not actually used them for retipping or anything else.
Jeff’s Sharpening & Supply For All Your Stumpgrinder Sharpening & Retipping Needs
Regular Office Hours & Shipping AddressSpecial Holiday Hours9AM – 5PM EST M-F866-997-427712521 Warner StreetHudson, MI 49247In Observance Of The Thanksgiving HolidayWe Will Be Closed Thu…
jeffssharpening.com
bbxlr8
Well-known member
Equipment
L2501 w/R14s, LA525, BH77, SGC0660, CL 5' BB, CL PHD, WG24 + Ford 1210 60" mmm,
Another company sold decent budget replacement teeth that people here recommended. I thought I saved it but can't find now, but there is a thread in the last year that covers it.
I haven't needed it yet but no doubt I will with all of the rock that "grows" on my property
I haven't needed it yet but no doubt I will with all of the rock that "grows" on my property