Where to keep a walking cane on a tractor?
- Thread starter pgmrdan
- Start date
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
I think something like this would work
If you have a ROPS you could mount it on that, or a tower on the FEl. You might be able to mount it in front of the steering wheel area.
There are many different styles of this but this one is removable and will not leave any damage.
If you have a ROPS you could mount it on that, or a tower on the FEl. You might be able to mount it in front of the steering wheel area.
There are many different styles of this but this one is removable and will not leave any damage.
A wise member of the forum gave me a good hack using the cross tube of the loader for shovels and rakes etc…I suppose I should pay it forward 
. It may not be at your hand from the operator station but if you can climb down and hold loader frame until you get to cross tube maybe that would work?
. It may not be at your hand from the operator station but if you can climb down and hold loader frame until you get to cross tube maybe that would work?GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
'ideal' place ?
whatever side you always get on/off ( left ?)
mount to loader uprights or whatever is 'there'.
cut a plastic pipe 2/3 length of the cane. be sure water can exit...
that way it's EASY to get to
whatever side you always get on/off ( left ?)
mount to loader uprights or whatever is 'there'.
cut a plastic pipe 2/3 length of the cane. be sure water can exit...
that way it's EASY to get to
^^^^^
It absolutely would work! First thing that came to my mind as well.
They can be fender mounted also (or other places). I use them hold a chain hook on my tractor.
My dad mounted a fishing pole holder to the FEL upright. Very quick and easy access.
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
I do not think a Command Strip will hold up to the vibration of a tractor. I've had things fall off a wall after a few months.
But the good news is, as you say, it won't damage anything to try.
I'd be more inclined to use something like this.
I have chains stored in the round tube of the FEL. They completely fill the available space (one side to the other).
You can't push all that chain into that space by hand. So the 'chain hook' allows me push (or pull it).
I didn't want a 'chain bucket' on my compact tractor.