Wheel installation tool

[Donystoy]

Recently fabricated up a tool to help my old body in removing and installing wheels on our vehicles and possibly the tractor if needed. Sorry it is not Kubota orange.

 

[skeets]

Thats pretty cool, how did you build it

 

[armylifer]

That is one very cool tool. It is a great idea. As a side note, a motorcycle jack can also be used in a similar manner. Here is the one that I use.

https://www.harborfreight.com/1500-lb-steel-atvmotorcycle-lift-60536.html

 

[Lil Foot]

That is one very cool tool. It is a great idea. As a side note, a motorcycle jack can also be used in a similar manner. Here is the one that I use.

https://www.harborfreight.com/1500-lb-steel-atvmotorcycle-lift-60536.html

I have the same one, with the same uses.

 

[Donystoy]

Thats pretty cool, how did you build it

Made from an implement jack that I altered, rollers and casters from Princess Auto up here. Used 1 1/2 square tubing and angle iron. The jack and roller frame are mounted to the lower castered frame via a 16” x 1” x 1” square vertical tubing welded to the outer castered frame. This 1” x 1” tubing cannot be seen as it is inside the jack with the jack screw inside it.