What's your L-series rear tire pressure?

[domigold]

The doc said 30psi. I found it to be too rough. Thinking about letting some air out. Perhaps to 15psi. What do you run yours at? Thanks.

 

[Sammy3700]

I run 14 in mine with R 4s

 

[B2710]

I have filled R14 tires, OM states 32 psi, I run 12 psi now after several weeks lowering it by 5 psi till I found a comfortable yet operational pressure. Your may be more or less depending on tractor weight and attachments.

 

[CGMKCM]

15 psi

 

[NCL4701]

15psi in loaded rears. Better traction and ride.

 

[bucktail]

About 15. I put my heaviest implement on and aired them up until they stopped squatting.

 

[Mak65]

14 in my R1’s on the L2501

 

[ctfjr]

30

 

[Roadworthy]

I run about fifteen psi in the rear tires.

 

[hope to float]

7/8psi. Anything over 10 I lose traction

 

[old and tired]

R4 - L2800; I had as low as zero (not sure how long I ran that way!) I shoot for 20 psi; I need to check it again... thanks for the reminder!!

 

[pokey1416]

20 as I have the heavy BH92 on the back most of the year. R4 tires.

 

[domigold]

In my loaded R4, I have it a round 20psi. I'm thinking about lowering it a bit more to 12-15psi to help with traction. Thought I double check what's everyone else is doing. Thanks everyone.

 

[woodsy]

I checked mine today after having the local tire shop over for getting ballast
in one 12.4 x 24 AG and a new outer valve stem in the other.
Let air out of both tires till I hit 20 PSI . Roll bar top bolts no longer
scraping the shed door header. Ill try this PSI for a spell but will probably let more out per the majority here. Currently have no 3pt implements .

 

[CKNPRO]

ballasted R4’s on 4701 at about 12# rear, 25# fronts air only. With that I still am a little too rounded but I haven’t dropped it any more. I’d guess I’m getting 90% tread contact on hard surface. Still rides a little rough for my full satisfaction but that’s just R4 for ya....they be stiff!