What did you do to or on your Kubota today?

[McMXi]

Mowed 6 acres and cleaned the deck. Lots of clover this time of year and it sticks to the bottom of the FDR2584 well. I love the clover smell though.

Side note. Can someone tell me if these are R14's or some type of R4?

View attachment 157342

Those appear to be the latest version of R4 tires. There was a tire grooving thread a while back in which I erroneously showed a photo of the same tires and referred to them as R14 tires but @Orange man corrected me.

Does tire grooving really work?

I have 4 tenths of a mile driveway to plow with hills and turns. Gave up on the plow truck because I always ran out of room due to piles and had to get the tractor out to move piles so I could continue to plow. Thought this is stupid and sold plow truck and tractor and purchased a low hour...

www.orangetractortalks.com

R4 latest

R14

 

[JonM]

Mowed 6 acres and cleaned the deck. Lots of clover this time of year and it sticks to the bottom of the FDR2584 well. I love the clover smell though.

Side note. Can someone tell me if these are R14's or some type of R4?

View attachment 157342

those look like r4

 

[Old_Paint]

Those appear to be the latest version of R4 tires. There was a tire grooving thread a while back in which I erroneously showed a photo of the same tires and referred to them as R14 tires but @Orange man corrected me.

Does tire grooving really work?

I have 4 tenths of a mile driveway to plow with hills and turns. Gave up on the plow truck because I always ran out of room due to piles and had to get the tractor out to move piles so I could continue to plow. Thought this is stupid and sold plow truck and tractor and purchased a low hour...

www.orangetractortalks.com

R4 latest

View attachment 157351

R14

View attachment 157352

Can confirm the R14s. Got ‘em on my LX2610SU. My little LX got a butt like J-Lo with the big R14s.

 

[McMXi]

Mowed 6 acres and cleaned the deck. Lots of clover this time of year and it sticks to the bottom of the FDR2584 well. I love the clover smell though.

Side note. Can someone tell me if these are R14's or some type of R4?

View attachment 157342

I think the bigger question here is what the heck are you doing looking at an L60 tractor, and most likely an L6060? Step away from the vehicle!

Seriously though, if you're thinking of upgrading (which you mentioned a few weeks ago), an L6060/MX6000 with a cab would be a really nice upgrade, with either the new R4 or R14 tires.

 

[BBFarmer]

My girl is looking sad these days. She won't even take a good picture anymore. Of course the crap in the bucket doesn't help.

Talked to my guy at Deviney (our tractor dealer) yesterday. Looks like shes going to head on in probably 3 weeks or so from now. Berries will mostly be done by then, and i'll be able to do without her for a bit.

They're going to get her face all straightened out and possibly another loader. I caught ten shades of hell putting the loader back on a couple weeks ago. I think she might be a little tweaked.

 

[S-G-R]

My girl is looking sad these days. She won't even take a good picture anymore. Of course the crap in the bucket doesn't help.

Talked to my guy at Deviney (our tractor dealer) yesterday. Looks like shes going to head on in probably 3 weeks or so from now. Berries will mostly be done by then, and i'll be able to do without her for a bit.

They're going to get her face all straightened out and possibly another loader. I caught ten shades of hell putting the loader back on a couple weeks ago. I think she might be a little tweaked.

View attachment 157365

What happened to the loader?

 

[S-G-R]

I think the bigger question here is what the heck are you doing looking at an L60 tractor, and most likely an L6060? Step away from the vehicle!

Seriously though, if you're thinking of upgrading (which you mentioned a few weeks ago), an L6060/MX6000 with a cab would be a really nice upgrade, with either the new R4 or R14 tires.

Things are changing that I'm going to need the increased loader lift capacity sooner than I thought. My largest pto need is the FDR2584 which Landpride rates at 15-60hp. I'm also going to have to lose the front blower i love so much. One is available for the Grand L but i dont want to have to switch back and forth a few times a month. Probably going with a 74" rear blower and a pusher.

The LX3310 has 27 pto hp. Was looking at a minimum of the 4760 for the heavier front axle and LA1055. It has 39.5 pto hp. 5460 has 46.5 and the 6060 sits at 53. I'm probably going to split the difference with the 5460. Waiting on pricing now.

Regarding the tires. I have R14's now and really like them but I've never seen them on a GL. Waiting to see what my options are.

 

[BBFarmer]

What happened to the loader?

Got in there a little too deep pushing small trees over where the end of driveway 2 is going to be. Had her bowed up pretty good a few times. Loader aint popped off right ever since. Also put a tiny little dip in the bucket. You know, just being stupid.

I'm in a orchard style setting. My tractor is basically a grass cuttin queen majority of the time. Got no business doing work like that with a loader that small.

Gonna be a tad bit smarter round 2. And definitely get a dang grill guard.

 

[JonM]

Things are changing that I'm going to need the increased loader lift capacity sooner than I thought. My largest pto need is the FDR2584 which Landpride rates at 15-60hp. I'm also going to have to lose the front blower i love so much. One is available for the Grand L but i dont want to have to switch back and forth a few times a month. Probably going with a 74" rear blower and a pusher.

The LX3310 has 27 pto hp. Was looking at a minimum of the 4760 for the heavier front axle and LA1055. It has 39.5 pto hp. 5460 has 46.5 and the 6060 sits at 53. I'm probably going to split the difference with the 5460. Waiting on pricing now.

Regarding the tires. I have R14's now and really like them but I've never seen them on a GL. Waiting to see what my options are.

ive got r14 on my 6060 and they have been fantastic all last winter in the ice and snow and then this spring in mud season.

no regrets at all

 

[S-G-R]

Got in there a little too deep pushing small trees over where the end of driveway 2 is going to be. Had her bowed up pretty good a few times. Loader aint popped off right ever since. Also put a tiny little dip in the bucket. You know, just being stupid.

I'm in a orchard style setting. My tractor is basically a grass cuttin queen majority of the time. Got no business doing work like that with a loader that small.

Gonna be a tad bit smarter round 2. And definitely get a dang grill guard.

I think we've all pushed the envelope with our tractors. The more we succeed with the more we try

I mentioned @5ELEVENDESIGNZ for the guard. I'm pleased with the present guard and I'll be putting in a order for another one once I get things finalized.