What did you do to or on your Kubota today?

[mcmxi]

A little coolant drain n fill on the L today. Super easy with the Schwaben vacuum tool!
View attachment 125819

Nice! I meant to thank you for the link to the Schwaben vacuum tool that you posted in another thread. I did in fact order one as I said I would. I hope that ECS Tuning is sending you some kickbacks for sending traffic their way.

 

[The Evil Twin]

Nice! I meant to thank you for the link to the Schwaben vacuum tool that you posted in another thread. I did in fact order one as I said I would. I hope that ECS Tuning is sending you some kickbacks for sending traffic their way.

I wish they would! Lol!
I still pulled the lower radiator hose to fully drain the system. Even then, about a pint came out of the tool exhaust port.

 

[johnjk]

Mowed with the B1700 and gathered up all the corn plant debris from the ditch with the B3200. Time for lunch and then to wash the mud off them

 

[rc51stierhoff]

Well, I don’t plan to drive under it again. The top is done. I worked on it until I got the folded over portion of the trunk folded in half. I ran out of focus and go-go juice at same time so I stopped for the day.

 

[mcmxi]

I wish they would! Lol!
I still pulled the lower radiator hose to fully drain the system. Even then, about a pint came out of the tool exhaust port.

Some friends bought me a $100 gift certificate from the local Kubota dealership so I'll be picking up a couple of gallons of Kubota coolant this week. With any luck I'll be changing the coolant in the MX this weekend, or next week at the latest. The M will be due for a change in the next month or so as well.

 

[The Evil Twin]

Some friends bought me a $100 gift certificate from the local Kubota dealership so I'll be picking up a couple of gallons of Kubota coolant this week. With any luck I'll be changing the coolant in the MX this weekend, or next week at the latest. The M will be due for a change in the next month or so as well.

I'll be interested to know how much the MX takes. My little L calls for 6 quarts but it only took a gallon. To be honest, I did not look for a drain on the block. Working on a lot of Ford trucks, I know a good bit will hide in there. But, like my vehicles, I stay on top of maintenance. So if another 2 quarts are in the block then I'm not worried about it.

 

[mcmxi]

I'll be interested to know how much the MX takes. My little L calls for 6 quarts but it only took a gallon. To be honest, I did not look for a drain on the block. Working on a lot of Ford trucks, I know a good bit will hide in there. But, like my vehicles, I stay on top of maintenance. So if another 2 quarts are in the block then I'm not worried about it.

The spec sheets states 6.9 quarts which is surprisingly low. The M holds 8.5 quarts supposedly. I stopped by the dealer this morning and had forgotten that they don't stock Kubota engine coolant. They sell NAPA premixed which is the same thing according to the parts and service counter.

 

[The Evil Twin]

The spec sheets states 6.9 quarts which is surprisingly low. The M holds 8.5 quarts supposedly. I stopped by the dealer this morning and had forgotten that they don't stock Kubota engine coolant. They sell NAPA premixed which is the same thing according to the parts and service counter.

Probably the same as Asian Green. Not to be confused with Soylent Green. I was going to switch to this, but didn't want to mix and didn't have time to flush it several times.

Zerex Asian Vehicle Green 50/50 Prediluted Antifreeze

Zerex from Valvoline is the #1 selling OEM-approved coolant brand. Zerex Asian Vehicle Green Antifreeze/Coolant is proven to maximize engine life in vehicles made by Asian auto manufacturers such as Acura, Honda, Infiniti, Nissan and others which specify a green formula that’s silicate and...

shop.valvolineglobal.com

 

[rc51stierhoff]

Took the little girl for a stroll in the afternoon moonlight…sort of….i mowed for first time this year and in totality(we had an eclipse here.)

The pups were just happy to have extra shade.

 

[mcmxi]

Probably the same as Asian Green. Not to be confused with Soylent Green. I was going to switch to this, but didn't want to mix and didn't have time to flush it several times.

Zerex Asian Vehicle Green 50/50 Prediluted Antifreeze

Zerex from Valvoline is the #1 selling OEM-approved coolant brand. Zerex Asian Vehicle Green Antifreeze/Coolant is proven to maximize engine life in vehicles made by Asian auto manufacturers such as Acura, Honda, Infiniti, Nissan and others which specify a green formula that’s silicate and...

shop.valvolineglobal.com

This is the stuff that the local Kubota dealer sells. NAPA had some stipulations re pricing, and so it's $13.99 a gallon at the dealership.

https://www.napaonline.com/en/p/NAFRTU1GAL

 

[dirtydeed]

day one of two day sewer line replacement...

Dig:

Eclipse...and digging under the eave of the roof was all that much fun.

backfill/rough grade...will smooth it off tomorrow..

and the best shot of the day...my friend's son loading me up withy another load of stone...

back at it tomorrow to finish connection at the street/alley

 

[The Evil Twin]

This is the stuff that the local Kubota dealer sells. NAPA had some stipulations re pricing, and so it's $13.99 a gallon at the dealership.

https://www.napaonline.com/en/p/NAFRTU1GAL

View attachment 125937

Bet it's the same thing. My local NAPA has em both. Same price too.

 

[mcmxi]

day one of two day sewer line replacement...

Dig:
View attachment 125945
View attachment 125946
View attachment 125947

Eclipse...and digging under the eave of the roof was all that much fun.

View attachment 125949

backfill/rough grade...will smooth it off tomorrow..

View attachment 125950

and the best shot of the day...my friend's son loading me up withy another load of stone...

View attachment 125951

back at it tomorrow to finish connection at the street/alley

I like that "stone" on the house, if it is in fact stone. Maybe it's a stone veneer. Nice project.

 

[DustyRusty]

I spent the day using the landscape rake pulling rocks out of the backyard, and filling in the depressions in the backyard with the rocks that I was picking up. Then found some fill to cover over the holes, but not enough to blend it into the rest of the yard. It was a very long tiring day, and to top it off, I got a flat tire on the way back to putting the tractor away. Small piece of metal like a piece of a paper clip or a thumbtack. Tomorrow I will see if I can get it plugged or a patch put on the inside. It is a front tire, and they are so small that it makes them difficult to dismount and remount.

 

[RichardAaronlx2610]

Nice! I meant to thank you for the link to the Schwaben vacuum tool that you posted in another thread. I did in fact order one as I said I would. I hope that ECS Tuning is sending you some kickbacks for sending traffic their way.

Ahhh. Ecs tuning. That brings me back to my Volkswagen days

 

[NCL4701]

Had an apple tree damaged in a storm over the winter that was messed up enough we finished it off. That left a stump I didn’t care to mow over or around, so ground it out. While the stump grinder was on, drove up the trail through the woods we widened a few days ago and knocked out the dozen or so small stumps that were in the trail. Could have left them but IMO it’s nicer without them.

 

[ayak]

Finally got that gate up, so Evil Twin can’t bring his Box Blade back

 

[The Evil Twin]

Finally got that gate up, so Evil Twin can’t bring his Box Blade back
View attachment 125993

I still might have time to write my initials in the cement

 

[Moose7060]

Finally got that gate up, so Evil Twin can’t bring his Box Blade back
View attachment 125993

By the looks of it he could just drive around!

 

[ayak]

By the looks of it he could just drive around!

I was thinking he might just go all full-out Knievel and get it done that way.