Not sure but that kit number I gave you had both sides. I don't know where dealer got the number. I never saw online while I was waiting.
What did you do to or on your Kubota today?
- Thread starter gurn
- Start date
Yes ....sorry on phone outside. That 97301 is for both. Like I said the dealer absorber the cost, but he ordered 2 think 1 per side. I had 2 full sets then. Im not dishonest so I took tje 1 back. Now I think he did chargé me with how he acted strange. My receipt is the out the door price after tax for the tractor.
Don't matter. I just hope the info helps you.
Waiting on snail mail eBay pigtails Then im done updating. Hope weather changes and drives up some lots to do.
Do you think that these mirrors are too large for a BX23S with the Curtis Delux cab? I have not been able to find any mirrors that are specific to the BX23S with cab.
Mill? I do. Some red oak. Have a few folks responding to my marketplace ad for just that reason.
I don’t have that many trees for sure. Still quite a few. Same reason I bought my LX.Tornado damage was one of the main reasons I pulled the trigger on getting my LX2610 and Virnig grapple now instead of waiting. My ‘52 8n was a workhorse but there were simply some tasks it wasn’t capable of.
Anyway…….I have about 100 downed trees to clean up. Unfortunately all but a handful are pine so I don’t even get firewood out of the deal.
Not sure. I would say that kit with the bolt on housings woukd work but you would need à attaching tab on your curtis cab with open holes. The threaded are in the moûnts already. I will measured them and attatch.
7 x 11 for the mirrors themselves. Over all height with arms 21 inches.
Has anyone switched their panel display units to Us for Mph and gallons instead of Liters ? I was trying it and stumbled on to a screen where you can.
With tractor off hold the display button
turn the key on till the display lights up
you will see a new screen with letters. Tap button till you get to J then hold. You will see your options then Mertric or Us. Choose what you want Hold button Turn the key off.
Now it will be changed on restart.
What I did today....
With tractor off hold the display button
turn the key on till the display lights up
you will see a new screen with letters. Tap button till you get to J then hold. You will see your options then Mertric or Us. Choose what you want Hold button Turn the key off.
Now it will be changed on restart.
What I did today....
Did more wood chipping with the WM WC46 again today and then hauled some logs on the B2601.
Then greased the FEL points.
Waxed the hood and wheels and other easy-to-get-it places.
Still will not take the 2nd 2 gallons at 10.4 hours, 5.4 hours on this 2 gallon refill try. It'll still be at around 0.34 to 0.4 gph or and easy 15 hours/tank. More or less normal operation this refill vs. a lot of idling in those first 5.7 hours.
Then greased the FEL points.
Waxed the hood and wheels and other easy-to-get-it places.
Still will not take the 2nd 2 gallons at 10.4 hours, 5.4 hours on this 2 gallon refill try. It'll still be at around 0.34 to 0.4 gph or and easy 15 hours/tank. More or less normal operation this refill vs. a lot of idling in those first 5.7 hours.
Well productive day finally. Temps were 34-37 and was able to free up the frozen barn doors, got the B2410 out, was considering splitting more wood, but by the time I cleared away snow from the front of the barn, got the doors open, worked with getting the hang of the forks and found a place to store the pallets for now, moved a trailer full of firewood, and got that stacked, I was beat. The new tractor is now safe and secure inside my barn and bummed that it is taller than the garage door opening. Says 91.1 and 8' is 96, but it is taller than the 8' garage door opening.
I have a radio, harness, crimp connections and a couple other items on the way from Amazon today, so waiting on those. Was hoping to have it in the garage to work on , but if it doesn't fit...
I have a radio, harness, crimp connections and a couple other items on the way from Amazon today, so waiting on those. Was hoping to have it in the garage to work on , but if it doesn't fit...
Are these actual measurements or specifications from the makers of the garage door and the tractor? I know that many, if not most, garage doors are poorly installed and don't give the maximum opening.
I have same issue. Door is 7 wide 8 tall and à slide. Cab very close. Ive left outside for now.
Going to replace with 10 foot this spring normal overhead door. Tired of ice and ground holding the door. Another project.
D
Deleted member 47704
Guest
Installed 90% of my 3rd function kit on my LX2610 today. I didn’t install the fittings at the implement end because I wanna make sure when my grapple gets here Tuesday that I have the right adapters and whatnot. I also have to grind a small notch in the right loader kickstand so it clears the bolt head on the new hardline clamp……not a big deal but I was just ready to be done for the day.
It’s the Kubota kit. I’m not a fan of the large loop of hose on the outside of the loader and I thought about modifying the included hard lines to run them towards the inside but that looks like it may create other issues so I’m gonna run it as is for now. The install was a breeze and I’m a fan of the included loader stick with integrated buttons.
Looking forward to testing it out.
The only issue I had installing the kit was not a problem with the kit. Whatever dealer shop gorilla put my wheels on needs a firm slap in the mush. I broke 3 impact extensions removing the wheel bolts. I used my 48” breaker bar and snap, snap, snap. I will say they weren’t Snap On or Mac but they have served me well for 30 years through all sorts of abuse. Met their match today.
It’s the Kubota kit. I’m not a fan of the large loop of hose on the outside of the loader and I thought about modifying the included hard lines to run them towards the inside but that looks like it may create other issues so I’m gonna run it as is for now. The install was a breeze and I’m a fan of the included loader stick with integrated buttons.
Looking forward to testing it out.
The only issue I had installing the kit was not a problem with the kit. Whatever dealer shop gorilla put my wheels on needs a firm slap in the mush. I broke 3 impact extensions removing the wheel bolts. I used my 48” breaker bar and snap, snap, snap. I will say they weren’t Snap On or Mac but they have served me well for 30 years through all sorts of abuse. Met their match today.
Last edited:
I have the Kubota third function kit on my LX2610 and I was initially worried about the hoses in the outside the loader arm but in 1-1/2 years I haven't caught them on anything yet.
Last edited:
I have a ton of work to do in the woods so I have some concern but it’s just something I’ll have to get used to watching. I’m sure it’ll be fine.
I'm confident in the kit enough to order it a second time for the LX3310.
GibbyESS9
Active member
Equipment
2020 Bx23s,BX2672 plow, Titan Forks, Land Pride 48” BB, FEL, Bestco Flail mower
Cleared the 3 inches of snow/ice from the private road I am on. I am last house on road. 7/8 of a mile. Love this little tractor. Started with my older 2007 Polaris quand and thought for a second. Hey dummie that why you bought a tractor. Love the front Blade. Have to try the pvc pipe addition to the front blade as some of the driveway/road is gravel.
Attachments
GibbyESS9
Active member
Equipment
2020 Bx23s,BX2672 plow, Titan Forks, Land Pride 48” BB, FEL, Bestco Flail mower
People cut 2 inch pvc pipe down the center and slide it onto the front plow blade so you don’t dig up the gravel. I was going to try it with the ate plow to see how well it works. People rave about it though.