What did you do to or on your Kubota today?

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,023
3,680
113
Wind Gap, PA
Tried out the new speeco "e-hitch". To my surprise, it works with an old 6 foot rear blade from an 8N. :D

quick hitch 1.JPG


Moved the top link connection on my EA box blade and that will now connect too. Yay.

quick hitch 2.JPG
 
  • Like
Reactions: 6 users

lakehouse_dreaming

Active member

Equipment
L3901HST, LA525 FEL, RGA1258 tiller, RCR1860 rotary cutter
Nov 2, 2021
59
125
33
29108
Moved some old panels and gates into the woods to patch a fence line that runs through it and had some limbs and tree fall on them during last weekends ice and this weekends snow. FEL made it much easier than in the past but I am really looking forward to pallet forks as well as a grapple.
IMG_5672[1].JPG


IMG_5671[1].JPG

IMG_5670[1].JPG
 
  • Like
Reactions: 3 users

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
It appears that when that tree in your picture comes down, it is going to take those wires with it. Doesn't the utility cut the treetops when they start to grow into the wires?
 

lakehouse_dreaming

Active member

Equipment
L3901HST, LA525 FEL, RGA1258 tiller, RCR1860 rotary cutter
Nov 2, 2021
59
125
33
29108
It appears that when that tree in your picture comes down, it is going to take those wires with it. Doesn't the utility cut the treetops when they start to grow into the wires?
They do trim the limbs when they get close. It isnt as close as it looks in the photos.
 
  • Like
Reactions: 1 user

johnjk

Well-known member
Lifetime Member

Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Apr 13, 2017
1,462
1,271
113
West Mansfield, OH
Finally got snow here. We had about 4” over the last two days and a lot of wind. Biggest hassle was the 2’ drift up by the house. Drive didn’t really need done but I scraped it anyway and used the Orange to get today’s mail
 

bmblank

Well-known member

Equipment
2020 L3901HST, LA525 Loader, 66" Q/A Bucket, PFL2042 Forks, Meteor SB68PT Blower
Mar 4, 2015
663
294
63
Cadillac, MI
Got about 12 inches of fresh powder. Love blowing that stuff lol
That's because you have a cab. I would prefer the wet sloppy stuff any day. It's not as easy to avoid a clog, but something about having a solid stream of snow going into the woods is nice. I'm not a big fan of the amorphous cloud of snow to drive thru.
 
  • Like
Reactions: 1 user

Hkb82

Well-known member

Equipment
M7060, Ford 5600, can-am defender
Nov 17, 2021
387
312
63
42
Ontario Canada
That's because you have a cab.
I did several years without a cab and obviously comfort level is way better but visibility is not always better with the cab. What I have noticed with getting a heated cab is we now get less snowfalls. Go figure lol
 
  • Like
Reactions: 1 users

bmblank

Well-known member

Equipment
2020 L3901HST, LA525 Loader, 66" Q/A Bucket, PFL2042 Forks, Meteor SB68PT Blower
Mar 4, 2015
663
294
63
Cadillac, MI
What I have noticed with getting a heated cab is we now get less snowfalls. Go figure lol
Sounds like you fixed the problem, to me. I figure if I buy a snowblower and it doesn't snow all winter.... Hey, I kept the driveway clear!
 
  • Like
Reactions: 1 users

fruitcakesa

Well-known member

Equipment
M 6040
Oct 26, 2010
856
270
63
Cavendish Vermont
I've been having difficulty engaging and releasing the female pioneer connectors on my tractor and implement; they seem to be failing.
One of them no longer springs back when the collar is slid open and the other one's balls seem sticky and don't want to release even when the collar is fully retracted.
I always depressurize the hydraulics after operating.
Today I got my order of a full set of new ag couplers from Summit via Amazon. $30 for 2 pairs of M&F
Not supposed to be too cold tomorrow so I might try replacing the old ones.
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
Today I removed the snow plow and installed the snowblower for the impending storm that is supposed to start around midnight tonight. I also changed the cab's front windshield wiper to a winter version that is rubber encased to keep the snow and ice from clogging it while in use.
 
  • Like
Reactions: 1 user

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,798
4,246
113
Central Piedmont, NC
Had a few minor maintenance jobs for the tractor today. Couldn’t touch up the gravel driveway because there was still a small area with ice on it. Had time to either chip the brush pile that’s getting a bit on the large side or clear some deadfall off one of the trails. Opted for chipping. Might clear the trail tomorrow.

0C3C7792-B290-4F59-B969-0867FD898AEC.jpeg
5BD7BD91-E335-4D92-87C6-8280EB264674.jpeg
5DFED305-0B13-4E18-A993-C425AB2D32A8.jpeg
 
  • Like
  • Love
Reactions: 6 users

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,879
2,293
113
central ct
In anticipation of the storm we are getting on Saturday I greased the tractor, topped off the fuel tanks in my genset and tractor and have all the batteries on chargers.
 
  • Like
Reactions: 1 user
D

Deleted member 47704

Guest
I filled tank with fuel that has hotshot in it, plug in the block heater tomorrow. Might have a big storm.
 

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,993
2,035
113
Edgewood, New Mexico
A delivery person’s SUV slid on the snow and ended up deep in the ditch. I showed up on the MX, hooked a chain to a clevis in the drawbar and the SUV’s bumper and drove forward. In a minute , he was back on the road. Then I realized that the MX was still in rear wheel drive only. I love this tractor.
 
Last edited:
  • Like
Reactions: 3 users
D

Deleted member 47704

Guest
Plowed snow and pushed banks back. put skid back shoes on, when I got done I put a contractors garbage bag over the seat and steering wheel.
 

forky

Well-known member

Equipment
L2501 HST 4X4 8N
Feb 23, 2021
266
275
63
Wisconsin
A delivery person’s SUV slide on the snow and ended up deep in the ditch. I showed up on the MX, hooked a chain to a clevis in the drawbar and the SUV’s bumper and drove forward. In a minute , he was back on the road. Then I realized that the MX was still in rear wheel drive only. I love this tractor.
Perfect example to only engage front assist when needed!
 

mdhughes

Well-known member
Lifetime Member

Equipment
L3901DT
Dec 10, 2014
1,251
719
113
Ste Geneveive county, MO
Cut down another Ash tree that has blonded. Not too much on the two logs on the tractor, but was really bad about another 20 foot up. This makes the 6th or 7th one that I have cut down. This is the two butt logs.

two_log.jpg
 
  • Like
Reactions: 4 users