Saturday, one of my friends used his brother's M4060 to load logs on to my trailer. Road with me to my house and he helped me unloaded them with my L3901DT.
What did you do to or on your Kubota today?
- Thread starter gurn
- Start date
Finally got around to doing a test fire of the lights,
mounted them in the grill and put it at the approximate correct height.
The trees are about fifty feet from the garage, nice'n'brite
bcbull378
Member
Equipment
GL3830,fel,brush hog,pallet forks,disc,gannon,auger,springtooth,plow,drag,ripper
I graded a new pad for a round pen for one of the neighbors worked my L3830 for 4 hours and made $300 I asked for $250 and the gal was so happy with what I had done she gave me $300
Attachments
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
Got the grab handles mounted on mine. Would have installed the hazard lights, but lost one of the nuts. Gotta run to fastenal Monday for a nut.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
Thanks, it's amazing what a difference it makes just slapping on a fresh coat of paint and getting the side covers back on it. It completely changed the whole looklove the 1501...
im jealous now, i need to paint mine too...
I agree it is beautiful, one day mine will be back together,love the 1501...
im jealous now, i need to paint mine too...
and hopefully just a sweet looking, One Day!
Got the rear end painted, before the weather comes in......
And ready for the weather, just in case, which looks to be early!
Now time to clean up the shop a bit.
And ready for the weather, just in case, which looks to be early!
Now time to clean up the shop a bit.
Grouse Feathers
New member
Lifetime Member
Equipment
BX2370, FEL, Snowblower-BX5455, Homebuilt Forks, LP RB1560, LP GS1548
When fixed up like yours, I think the old style tractors look better and more like a tractor than the new streamlined designs.Thanks, it's amazing what a difference it makes just slapping on a fresh coat of paint and getting the side covers back on it. It completely changed the whole look
Why streamline an 8 mph tractor? Maybe it saves fuel if your blowing snow into a 60 mph wind.Any way your tractor keeps looking better and better.
Grouse Feathers
New member
Lifetime Member
Equipment
BX2370, FEL, Snowblower-BX5455, Homebuilt Forks, LP RB1560, LP GS1548
Topped off the fuel to be ready for the 6" of wet heavy snow tomorrow. Maybe I should wish this storm south to sheepfarmer.
Maybe I should wish this storm south to sheepfarmer.bmblank
Well-known member
Equipment
2020 L3901HST, LA525 Loader, 66" Q/A Bucket, PFL2042 Forks, Meteor SB68PT Blower
I've been working on converting my 3pt blower chute from hand crank to winch driven with a wireless remote. Got the winch installed finally. Still need to wire it up. Don't have the relay or switch or connectors yet. I did throw some wheels on it, though, so I can dolly it around without the tractor. I like those alot.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
Putting the final touches on my B7100. Just about done with my project list. I finished my gauge install today. I installed an oil pressure gauge, a coolant temp gauge, a volt meter and an hour meter (original does not work). I put the hour meter under the hood. The rest if the gauges are on the dash. I also replaced the clevis pins in my 3 pt hitch and straightened a few things out. A few more items left to go through and the old girl will be ready to work.
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
I was having a really good day mowing Till, I found a piece of steel that had worked its way to the surface in the back yard.
So, I'm getting a break and going to tsc to see if I can find some new blades
Sent from my iPhone using Tapatalk
Till, I found a piece of steel that had worked its way to the surface in the back yard.
So, I'm getting a break and going to tsc to see if I can find some new blades
Sent from my iPhone using Tapatalk
Added tie down D-Rings to the front of the BX, pulled the MMM off and sharpened the blades, greased all the fittings and checked bolt torque on the FEL.
Then my son and I went to the back part of our property and picked up 5 bucket fulls of pine cones and pine sticks. Now I can mow around the pine trees with out making it sound like a war zone hitting all the pine cones. Besides we'll have a nice, quick, fire next weekend in our fire pit with all the pine cones and sticks.
Then my son and I went to the back part of our property and picked up 5 bucket fulls of pine cones and pine sticks. Now I can mow around the pine trees with out making it sound like a war zone hitting all the pine cones. Besides we'll have a nice, quick, fire next weekend in our fire pit
with all the pine cones and sticks.
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Dayum Daren.......It sayssssss ."GRASS ONLY"......
I saw something like that last year, the AD at school hit a metal shot put........that all steel ball did the same thing as yours!
I saw something like that last year, the AD at school hit a metal shot put........that all steel ball did the same thing as yours!
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
Yeah, It was a good thing I was holding onto the steering wheelDayum Daren.......It sayssssss ."GRASS ONLY"......
I saw something like that last year, the AD at school hit a metal shot put........that all steel ball did the same thing as yours!
I came out of the seat with the bang, bang, bang it made Figuring the tire kicked it up. Blades are an odd ball size, so I had to order them. Ordered 6, so this way I can swap a set and keep going. And sharpen the others when convenient