What did you do to or on your Kubota today?

Howling

Member

Equipment
BX2370
Feb 5, 2016
217
10
18
Ayer, MA
Received electrical enclosures for a project.
Enclosure 1.jpg

That is about 500 lbs of steel. My BX2370 was able to lift from end when unloading trailer.
 

billrigsby

Well-known member

Equipment
L1500DT Too many implements, or is there such a thing?
Mar 17, 2015
1,022
208
63
Florissant CO USA 8213'
www.facebook.com
A slow day, as far as getting a lot done but Saturday I got some LED Off-Road lights in
and today I tore the hell outa them. They are now mounted in the stock
L1500 headlight fixtures.
View attachment 21295
Finally got around to doing a test fire of the lights,
mounted them in the grill and put it at the approximate correct height.

DSC_0068 (2).jpg DSC_0067 (2).jpg

The trees are about fifty feet from the garage, nice'n'brite

DSC_0063 (3).jpg DSC_0062 (3).jpg
 

bcbull378

Member

Equipment
GL3830,fel,brush hog,pallet forks,disc,gannon,auger,springtooth,plow,drag,ripper
Sep 6, 2011
579
29
18
Ventura Ca
I graded a new pad for a round pen for one of the neighbors worked my L3830 for 4 hours and made $300 I asked for $250 and the gal was so happy with what I had done she gave me $300
 

Attachments

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,200
6,712
113
Vilonia, Arkansas
Got the grab handles mounted on mine. Would have installed the hazard lights, but lost one of the nuts. Gotta run to fastenal Monday for a nut.






Sent from my iPhone using Tapatalk
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,200
6,712
113
Vilonia, Arkansas
love the 1501...
im jealous now, i need to paint mine too... :D
Thanks, it's amazing what a difference it makes just slapping on a fresh coat of paint and getting the side covers back on it. It completely changed the whole look :D:D
 

Grouse Feathers

New member
Lifetime Member

Equipment
BX2370, FEL, Snowblower-BX5455, Homebuilt Forks, LP RB1560, LP GS1548
Feb 16, 2015
1,022
10
0
Lovells, Mi
Thanks, it's amazing what a difference it makes just slapping on a fresh coat of paint and getting the side covers back on it. It completely changed the whole look :D:D
When fixed up like yours, I think the old style tractors look better and more like a tractor than the new streamlined designs.;) Why streamline an 8 mph tractor?:confused: Maybe it saves fuel if your blowing snow into a 60 mph wind.:rolleyes:

Any way your tractor keeps looking better and better.
 

Grouse Feathers

New member
Lifetime Member

Equipment
BX2370, FEL, Snowblower-BX5455, Homebuilt Forks, LP RB1560, LP GS1548
Feb 16, 2015
1,022
10
0
Lovells, Mi
Topped off the fuel to be ready for the 6" of wet heavy snow tomorrow.:eek: Maybe I should wish this storm south to sheepfarmer.:p
 

bmblank

Well-known member

Equipment
2020 L3901HST, LA525 Loader, 66" Q/A Bucket, PFL2042 Forks, Meteor SB68PT Blower
Mar 4, 2015
667
296
63
Cadillac, MI
I've been working on converting my 3pt blower chute from hand crank to winch driven with a wireless remote. Got the winch installed finally. Still need to wire it up. Don't have the relay or switch or connectors yet. I did throw some wheels on it, though, so I can dolly it around without the tractor. I like those alot.



Sent from my XT1254 using Tapatalk
 

procraftmike

Member

Equipment
1977 B7100DT w/B219 FEL
Jan 27, 2016
277
10
18
Neenah, WI
Putting the final touches on my B7100. Just about done with my project list. I finished my gauge install today. I installed an oil pressure gauge, a coolant temp gauge, a volt meter and an hour meter (original does not work). I put the hour meter under the hood. The rest if the gauges are on the dash. I also replaced the clevis pins in my 3 pt hitch and straightened a few things out. A few more items left to go through and the old girl will be ready to work.
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,200
6,712
113
Vilonia, Arkansas
I was having a really good day mowing :D Till, I found a piece of steel that had worked its way to the surface in the back yard. :(



So, I'm getting a break and going to tsc to see if I can find some new blades :rolleyes:


Sent from my iPhone using Tapatalk
 

kckndrgn

New member

Equipment
BX2370 w/ 60" MMM and FEL, Box Blade, Bush Hog, Carry All & Tiller
Mar 17, 2016
150
1
0
Somerville, TN
Added tie down D-Rings to the front of the BX, pulled the MMM off and sharpened the blades, greased all the fittings and checked bolt torque on the FEL.

Then my son and I went to the back part of our property and picked up 5 bucket fulls of pine cones and pine sticks. Now I can mow around the pine trees with out making it sound like a war zone hitting all the pine cones. Besides we'll have a nice, quick, fire next weekend in our fire pit :) with all the pine cones and sticks.
 

Aluthin

Member
Lifetime Member

Equipment
Kubota B6000
Aug 7, 2015
63
0
6
United Kingdom
Putting the final touches on my B7100. Just about done with my project list. I finished my gauge install today. I installed an oil pressure gauge, a coolant temp gauge, a volt meter and an hour meter (original does not work). I put the hour meter under the hood. The rest if the gauges are on the dash. I also replaced the clevis pins in my 3 pt hitch and straightened a few things out. A few more items left to go through and the old girl will be ready to work.
How about a pic of the dash

Sent from my MotoG3 using Tapatalk
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,769
2,581
113
Bedford - VA
Dayum Daren.......It sayssssss ."GRASS ONLY"......:D;):)

I saw something like that last year, the AD at school hit a metal shot put........that all steel ball did the same thing as yours!
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,200
6,712
113
Vilonia, Arkansas
Dayum Daren.......It sayssssss ."GRASS ONLY"......:D;):)

I saw something like that last year, the AD at school hit a metal shot put........that all steel ball did the same thing as yours!
Yeah, It was a good thing I was holding onto the steering wheel :D I came out of the seat with the bang, bang, bang it made :eek: Figuring the tire kicked it up. Blades are an odd ball size, so I had to order them. Ordered 6, so this way I can swap a set and keep going. And sharpen the others when convenient :D