Top Link is hard to turn ... what lubricant do you use?

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,386
1,810
113
Western MT
My top link is extremely hard to turn recently. I cleaned the threads and regreased, but still, it's hard to turn.

Is this one of those deals that I have to buy a new one to get similar performance that I was used to? Other ideas?
 

johnjk

Well-known member
Lifetime Member

Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Apr 13, 2017
1,472
1,298
113
West Mansfield, OH
Is it bent? I just use the same grease I use on the FEL and other lube points. I did bend my original top link when I raised my 3pt with the ROPs down. Ended up buying a new one
 
  • Like
Reactions: 1 users

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,244
5,423
113
Chenango County, NY
I only have a BX, but my first impression of the top link was it was junk. Damn thing wouldn’t turn. Never used it.

Bought a couple aftermarket versions ($25) and have left the OEM hanging on the wall for 10 years.

Just my experience.
 
  • Like
Reactions: 1 user

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
8,928
4,668
113
Myersville, MD
windyridgefarm.us
My top link is extremely hard to turn recently. I cleaned the threads and regreased, but still, it's hard to turn.

Is this one of those deals that I have to buy a new one to get similar performance that I was used to? Other ideas?
Did it turn OK when you were cleaning and greasing it?

Dan
 
  • Like
Reactions: 1 users

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,897
2,325
113
central ct
In all my previous tractors I always took the top link apart and really greased the hell out of everything before reassembling it. Would grease the exposed threads occasionally after. Never had a problem.
 
  • Like
Reactions: 1 users

cthomas

Well-known member
Lifetime Member

Equipment
LX2610 HSDC
Jan 1, 2017
865
580
93
La Farge Wi
I have a hydraulic top link, so just a little finger pressure. If it got hard to turn recently I suspect it is bent or the threads are pulled.
 
  • Like
Reactions: 2 users

ZTMAN

Active member

Equipment
BX2380
Aug 26, 2018
163
85
28
South Central Pa
My top link is extremely hard to turn recently. I cleaned the threads and regreased, but still, it's hard to turn.

Is this one of those deals that I have to buy a new one to get similar performance that I was used to? Other ideas?
Is it hard to turn without an implement attached or with an implement attached?
 
  • Like
Reactions: 3 users

DaveFromMi

Well-known member

Equipment
L3901 RCR1260
Apr 14, 2021
614
531
93
Indiana
Mine got bent where it attaches to the tractor. It worked fine when I took the bushhog off. I had a potato plow on it and set it to minimum length. I plowed into something hard while digging potatos and it stalled the tractor briefly. I got an aftermarket replacement cat 1 link at the local Kubota dealer. It is heavier duty than the OEM link. I need to change the color from yellow to dark gray.
 
  • Like
Reactions: 1 user

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,386
1,810
113
Western MT
Is it bent? I just use the same grease I use on the FEL and other lube points. I did bend my original top link when I raised my 3pt with the ROPs down. Ended up buying a new one
I guess it could be bent although I don't know how. I'll remove it and take a look.
 

kubotafreak

Well-known member

Equipment
GRAND l6060, L3560, B6100, gr2100, tg 1860, g1800, g1900, g2160
Sep 20, 2018
1,049
394
83
Arkansas, US
Take it loose from the implement, and see if resistance is isolated to one half. If one half is slightly bent, you should be able to buy just that threaded eye from Kubota. if the threads are pulled, then the whole thing is pretty much scrap.

However an aftermarket complete unit is probably the same price...
 
  • Like
Reactions: 2 users

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
8,928
4,668
113
Myersville, MD
windyridgefarm.us
I can only turn it with a pipe wrench.
Its just a screw thread joint so obviously the threads are buggered - galled, corroded, deformed, and/or bent by use. If it wont clean up go to your local tractor supply and buy a replacement.

Dan
 
  • Like
Reactions: 2 users

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,386
1,810
113
Western MT
Looking online at prices being less than $40, I'm just going to buy another.
 
  • Like
Reactions: 1 users

Vigo

Well-known member

Equipment
B6100, B8200
Jan 9, 2022
595
340
63
San Antonio Texas
Still have to figure out why it became hard to turn, probably some sight bend thats not obvious. If so it would only he hard to turn on that end as already mentioned.

I use anti seize because it is abrasive so it is somewhat self-cleaning/self-clearancing with use. But, its also well known to get everywhere and make a huge mess if too much is used!

Replacement (manual) top links are so cheap you may just want to pay the $40 to skip the fight. Just make sure to compre lengths because they do come in various sizes.

Edit: I see you said as much while i was posting. I think buying one is the smart money vs sinking much time into it. 👍
 
  • Like
Reactions: 1 user

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,847
5,070
113
Eastham, Ma
Is it bent? I just use the same grease I use on the FEL and other lube points. I did bend my original top link when I raised my 3pt with the ROPs down. Ended up buying a new one
Clean all the old grease off with brake clean, or some other solvent.
Then: apply a generous amount of anti-seize/never-seize, and run the threads in and out.
Standby for a personal coating of anti-seize/ never-seize every time you are closer than 5 feet!
 
  • Like
Reactions: 1 user

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,386
1,810
113
Western MT
Just to follow up, I bought the Tractor Supply replacement for $34.99 which I find is much better than the OEM original. That's kind of a shame considering how much the tractors cost. I think Kubota would be better off using the Tractor Supply version.

Yes, you do have to drive the leverage bar through the hole, but otherwise, it's so far a significant upgrade to me. The leverage bar since it slides is almost double the length. Also, instead of using a locking nut, it has a lever that you can tighten with your hand. It also seems quite a bit more substantial.
 
  • Like
Reactions: 1 users