The new MX6000 with cab is here ... well ... almost.

[mcmxi]

A big chunk of the new MX6000 HSTC showed up from Japan this past Friday but we're still waiting on the FEL and a few other pieces. Now I'm really starting to get excited.

 

[jimh406]

Even though it's not all there, I'm still jealous.

 

[jyoutz]

A big chunk of the new MX6000 HSTC showed up from Japan this past Friday but we're still waiting on the FEL and a few other pieces. Now I'm really starting to get excited.

View attachment 70293

View attachment 70294

Very nice. My open station MX6000 will be delivered next week. I’m getting anxious.

 

[JRS]

Congrats on your new tractor. I know how you feel! After waiting two months for my MX 6000 cab with FEL to arrive it has been sitting at the dealership for 3 weeks waiting on hydraulic valves. I did get to sit in it!

 

[mcmxi]

Thanks for the kind words. I upgraded to rear defrost and wiper so will get to keep the standard rear glass shown as a spare. You never know when you might need it.

 

[mcmxi]

Anyone notice that the top of the cab is dented? My dealer just called to tell me that they've ordered a replacement top which will be here before the other parts. They've seen a couple like this already and think it has something to do with how they're being shipped. The plastic top is held on with screws and supposedly you have to remove it to get access to some A/C components.

 

[Ikc1990]

At least they are hard gonna get it fixed before delivery lol

 

[Jchonline]

Nice. My dealer had a brand new one with FEL available last week (already assembled) but I turned it down for the L6060. HST + on the M62 spoiled me.

 

[rc51stierhoff]

Folks I am proud to meet you. Below is delivery day earlier this year and later this summer when BH finally arrived. Enjoy that new smell. And if you took the kubota finance sleep well knowing that each passing day you are saving money on a dollar against inflation. I hope your buy experience is happy one. When They dropped the little girl off the rollback I suggested the driver leave me alone with her for a little bit cause it’s going to get ‘awkward and I need some adult time with her’. We had a laugh for sure. Oh my…Best money I ever spent so far.

 

[Goz63]

A big chunk of the new MX6000 HSTC showed up from Japan this past Friday but we're still waiting on the FEL and a few other pieces. Now I'm really starting to get excited.

View attachment 70293

View attachment 70294

You already have one. Pull the FEL of your other one until the new one arrives. Problem solved. I take it you would rather use the cab one right? Congrats By The Way!

 

[mcmxi]

Nice. My dealer had a brand new one with FEL available last week (already assembled) but I turned it down for the L6060. HST + on the M62 spoiled me.

The L6060 is without doubt a nice upgrade over the MX6000, and if I didn't already have a lot of money invested in this endeavor with implements, trailers and other accessories I would opt for the L6060 every time. Comparing transmissions is like comparing the space shuttle to a crop duster!

 

[mcmxi]

You already have one. Pull the FEL of your other one until the new one arrives. Problem solved. I take it you would rather use the cab one right? Congrats By The Way!

Thanks, but I'm ok with the waiting part. There are more parts needed than just the FEL. I chose every available option and those parts are trickling in also.

I've said this a number of times but my main motivation to get the cab model is the dust. I have no problem with the cold or even the heat, but the dust poses a serious health risk in addition to being obnoxious. Since there's no dust at present, and my current MX is sold in the form of a commitment to buy regardless of hours, I feel no pressure to have the dealer deliver the new one.

 

[Jchonline]

The L6060 is without doubt a nice upgrade over the MX6000, and if I didn't already have a lot of money invested in this endeavor with implements, trailers and other accessories I would opt for the L6060 every time. Comparing transmissions is like comparing the space shuttle to a crop duster!

Funny you mention the investment in other things…When the dealer called me to inquire about the MX6000 I thought hard about it, but then realized I had $1500 worth of mods sitting in my garage that only fit the L6060. Curse you Paul! https://www.specialtyrepairscustommods.com/

 

[Jchonline]

Anyone notice that the top of the cab is dented? My dealer just called to tell me that they've ordered a replacement top which will be here before the other parts. They've seen a couple like this already and think it has something to do with how they're being shipped. The plastic top is held on with screws and supposedly you have to remove it to get access to some A/C components.

That looks like a horizontal bump. Either it fell over on that side, or they hit it with something (fork lift, etc). Double check that the glass or chassis it sits in isnt damaged. It’s amazing just how little of a nudge from this heavy equipment it takes to break something.

 

[mcmxi]

Funny you mention the investment in other things…When the dealer called me to inquire about the MX6000 I thought hard about it, but then realized I had $1500 worth of mods sitting in my garage that only fit the L6060. Curse you Paul! https://www.specialtyrepairscustommods.com/

Buying the tractor is just the start. It's not hard to spend $20k on implements, another $5k to $10k on a trailer and $2k on accessories.

 

[mcmxi]

That looks like a horizontal bump. Either it fell over on that side, or they hit it with something (fork lift, etc). Double check that the glass or chassis it sits in isnt damaged. It’s amazing just how little of a nudge from this heavy equipment it takes to break something.

I have a great relationship with the guys at the local dealer so I'm not worried about any issues not being addressed. They're friends and not just sales people and I know that they didn't do the damage but will take care of it.

The manager of my local dealer bought my BX25 and is always texting me photos of his son or him doing various projects.

 

[hedgerow]

MCMXI Glad to hear your getting closer to having the cabbed MX-6000. My open MX-6000 that I bought back in June has been flawless. Its been averaging a regen about every fifty hours. The only dislike I have with the tractor is I wish it had a larger fuel tank. Its been a pretty nice fall around here so a lot more spot spraying has went on than normal. I need to give mine a final clean up and it will go into the shed until spring as I do my snow removal with my S-750 Bobcat.

 

[mcmxi]

MCMXI Glad to hear your getting closer to having the cabbed MX-6000. My open MX-6000 that I bought back in June has been flawless. Its been averaging a regen about every fifty hours. The only dislike I have with the tractor is I wish it had a larger fuel tank. Its been a pretty nice fall around here so a lot more spot spraying has went on than normal. I need to give mine a final clean up and it will go into the shed until spring as I do my snow removal with my S-750 Bobcat.

I have almost 100 hours on my MX since buying it in February but it goes into regen way more often than every 50 hours. I might be idling it too much.

These are such amazing tractors and my girlfriend thinks that I should keep the open station for her and have the cabbed model for me. She was grading the driveway yesterday and doing a great job.

 

[rc51stierhoff]

I have almost 100 hours on my MX since buying it in February but it goes into regen way more often than every 50 hours. I might be idling it too much.

These are such amazing tractors and my girlfriend thinks that I should keep the open station for her and have the cabbed model for me. She was grading the driveway yesterday and doing a great job.

Put a ring on her finger. If she has huntable acreage is she looking to adopt?

 

[mcmxi]

Put a ring on her finger. If she has huntable acreage is she looking to adopt?

I'm way ahead of you on that! We're most likely going to buy a place with land in the Great Falls area at some point so will keep you in mind when it's time to think about starting a family!