The Glass
- Thread starter DustyRusty
- Start date
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
I'm still sticking with 4You pointed out that 6 is blocked, so how is it that 3 will only fill to 3/4?
Runs With Scissors
Well-known member
Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Assuming a "main bottle flow rate" of less than the flow rate of the tubes, my vote is 3.
2 and 4 don't get any until 3 gets filled.
The others are blocked
2 and 4 don't get any until 3 gets filled.
The others are blocked
Biker1mike
Well-known member
Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
I think if you pour into the top glass faster than it drains to the other glasses you can fill glass 1 to over flowing before and other is filled.
Keep flow between the two outlets and glass 3 will overflow.
Work on this long enough and you will not notice that your 12 ounce beer is now only 11.2 ounces. Just over 330 ml
Keep flow between the two outlets and glass 3 will overflow.
Work on this long enough and you will not notice that your 12 ounce beer is now only 11.2 ounces. Just over 330 ml
motionclone
Well-known member
Lifetime Member
Equipment
L345DT with Lp mower, forks and grapple thumb, Bobcat 337 Midi Ex
motionclone
Well-known member
Lifetime Member
Equipment
L345DT with Lp mower, forks and grapple thumb, Bobcat 337 Midi Ex
Never saw the cap. Too focused on the other stuff. Its definitely 9
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
None of them. Only one bottle supply is shown. If it was supplied by a beer tap rather than one bottle, , then glass #7…
Biker1mike
Well-known member
Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
And this is why I drink bourbon. It is way to darn expensive to play sophomoric games with.
Pour it and sip
Pour it and sip
JimDeL
Well-known member
Lifetime Member
Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
Don’t think so. The lower part of the glass 1 outputs to glass 3. Glass 3 outputs to glass 7. Simple as that.
What am I missing? Granted no genius here…
Of course, it could be a trick question. The first glass to get fill is glass 1. Not filled, just fill.
Shame on you, DustyRusty!
Last edited:
JimDeL
Well-known member
Lifetime Member
Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
The pipe to 7 is blocked at 3, so nothing will get to 7.Don’t think so. The lower part of the glass 1 outputs to glass 3. Glass 3 outputs to glass 7. Simple as that.
What am I missing? Granted no genius here…
Of course, it could be a trick question. The first glass to get fill is glass 1. Not filled, just fill.
Shame on you, DustyRusty!
Don’t forget to take into account the volume of those tubes that are blocked at the bottom! Lol. Filling those tubes will take some time, while other cups are filling and over flowing! Pretty sure our hydraulic gurus will be chiming in here soon with some mathematical equations! 
I keep thinking…. “What is WRONG with these ordinarily-fairly-sharp fellows…?? Can’t they see nothing is coming out of the beer bottle..?”
That‘s correct obviously. Missed that. With that in mind the answer is obviously glass six.
In my defense, I will say that I live in a three dimensional world, and thought those tubes going to glasses 5 and 7 were connected on the back where they couldn’t be seen…
JimDeL
Well-known member
Lifetime Member
Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
No! Six is blocked at the bottom of the tube.That‘s correct obviously. Missed that. With that in mind the answer is obviously glass six.
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,