I have a TG2746A snowthrower with the TG2739A Implement coupler. I'm mounting it on a TG1860G tractor. I bought them used and I am trying hook it up for the first time this winter. I'm mostly sure I have all the parts. I did identify that I was missing the tension spring from the parts diagram and ordered that.
With a little work, I have managed to mount the blower on the front and connect it to the coupler. I cannot figure out how to attach the lifting mechanism(Part# 70060-70349) and connect it to everything else.
I found the other thread describing the TG2746 (not the "A" version). But even there there were no pictures of the assembly connected under the tractor.
My local Kubota dealer didn't have much information or even a manual that I could get.
I would really appreciate any help you guys might be able to provide.
Thanks
With a little work, I have managed to mount the blower on the front and connect it to the coupler. I cannot figure out how to attach the lifting mechanism(Part# 70060-70349) and connect it to everything else.
I found the other thread describing the TG2746 (not the "A" version). But even there there were no pictures of the assembly connected under the tractor.
My local Kubota dealer didn't have much information or even a manual that I could get.
I would really appreciate any help you guys might be able to provide.
Thanks