Some jobs have more risk than others

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
Yup. A cofferdam for a bridge foundation. I spent the winter of ‘91 inside of one with the river lever 40 ft above. I made $13/hr.

These photos are a bit more recent than my early years. Winter of ‘22. That’s a 300 tonne barge crane picking a 200 tonne crawler crane to set it on a drilled shaft platform that resulted in a 12 ft diameter, 200 + ft long shaft for a bridge foundation. Tonne = 2200 lbs or 1.1 tons. 200 tonnes is equivalent to about 6 semi trucks at legal max load with two trailers.

IMG_0642.jpeg
IMG_5456.jpeg
IMG_0957.jpeg
IMG_5889.jpeg
 
Last edited:
  • Like
  • Wow
Reactions: 9 users

Bmyers

Well-known member
Lifetime Member

Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
May 27, 2019
3,293
3,849
113
Southern Illinois
Back in 1991 when I first started on the ambulance, I was making $5.75 and we got to go down inside cofferdam on the bridge that was being built to pull out injured employee (had to do this twice). Yet, I was young and dumb, thought it was cool at the time. The older I got, the more I realized just how dangerous things can be.
 
  • Like
Reactions: 1 users

Flintknapper

Well-known member
Premium Member

Equipment
L2350DT
May 3, 2022
1,767
2,226
113
Deep East Texas
Back in 1991 when I first started on the ambulance, I was making $5.75 and we got to go down inside cofferdam on the bridge that was being built to pull out injured employee (had to do this twice). Yet, I was young and dumb, thought it was cool at the time. The older I got, the more I realized just how dangerous things can be.
^^^^^^

Me too.

But with the passage of time.....I was able to get over being 'young'. The other, not so much.
 
  • Haha
  • Like
Reactions: 3 users

Biker1mike

Well-known member

Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Jan 11, 2022
1,177
1,278
113
Gallatin, NY USA
Back in 1991 when I first started on the ambulance, I was making $5.75 and we got to go down inside cofferdam on the bridge that was being built to pull out injured employee (had to do this twice). Yet, I was young and dumb, thought it was cool at the time. The older I got, the more I realized just how dangerous things can be.
Young, fearless and invincible on the nozzle inside a burning mobile home protecting the search team. All made it out !
Family was lucky that the FD was doing weekly check out and the rigs were all on the apron with full crews. On the road before the siren stopped.
 
  • Like
Reactions: 1 user

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,821
2,838
113
Virginia
Not sure which one has the most dangerous job. The plumber or the electrician. Lol!!
IMG_0273.JPG
 
  • Like
  • Wow
Reactions: 6 users

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
Back in 1991 when I first started on the ambulance, I was making $5.75 and we got to go down inside cofferdam on the bridge that was being built to pull out injured employee (had to do this twice). Yet, I was young and dumb, thought it was cool at the time. The older I got, the more I realized just how dangerous things can be.
Things are a bit safer now, but early in my career cofferdams did fail on occasion. Usually with the bottom coming up into the cell and flooding it. So a life vest and NOT being tied to something were the key to being around to fixing it after the fact.
 
  • Like
Reactions: 1 users

xrocketengineer

Well-known member
Lifetime Member

Equipment
BX1880, FEL, Grapple, 36 in. Forks, 48in. MMM, Quick Spade, Ripper
Nov 14, 2020
749
648
93
Merritt Island, Florida
In the early days of the Space Shuttle Program, our offices were located in the third floor of the low bay of the Vehicle Assembly Building, the smaller white box section below the NASA meatball. Our office had no windows but it a had a permanently shut door with a small window facing the transfer bay (large open door). There was a about a 50 foot step down from that door that during that Apollo time led to some access platforms, no longer existing. The contractors had it worse since some of their "office space" was right in the high bays, where the Space Shuttle was stacked. They would have an "I" beam crossing at 45 degrees in front of their desks.
We use to have regular fire drills and every time there was some kind of new "enhancement" to the evacuation process which was always a mess and slow with the crowd going downstairs to clear out.

1690385574306.png


It turned out that the concern was with the solid rocket motors getting ignited inside the building with a static electricity discharge. We eventually were moved out to trailers because even if the solid motor did not blow up if ignited, the solid propellant burn rate would fill the building with poisonous fumes in six seconds. No matter how much we practiced in the fire drills, nobody would make it out alive.

1690402440546.png
 
  • Like
Reactions: 7 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,332
6,347
113
NW Montana
I've worked inside cofferdams in a previous career as a diver/welder working in the construction industry. We often had the job of cutting the sheet pile to grade once the work inside the dam was completed. Not a particularly dangerous job unless the crane or rigging gave out when most of the sheet pile had been cut.

I found myself in much more dangerous conditions doing other diving/welding/construction related jobs. Boarding a Chinese freighter at night in 30ft seas via a rope ladder comes to mind, or working hundreds of feet up a 36" outfall on SCUBA, or standing in 12ft or deeper holes waist deep in water and mud running a pile cutting machine without any shoring.
 
  • Like
Reactions: 2 users

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,158
6,595
113
Vilonia, Arkansas
In the early days of the Space Shuttle Program, our offices were located in the third floor of the low bay of the Vehicle Assembly Building, the smaller white box section below the NASA meatball. Our office had no windows but it a had a permanently shut door with a small window facing the transfer bay (large open door). There was a about a 50 foot step down from that door that during that Apollo time led to some access platforms, no longer existing. The contractors had it worse since some of their "office space" was right in the high bays, where the Space Shuttle was stacked. They would have an "I" beam crossing at 45 degrees in front of their desks.
We use to have regular fire drills and every time there was some kind of new "enhancement" to the evacuation process which was always a mess and slow with the crowd going downstairs to clear out.

View attachment 108094

It turned out that the concern was with the solid rocket motors getting ignited inside the building with a static electricity discharge. We eventually were moved out to trailers because even if the solid motor did not blow up if ignited, the solid propellant burn rate would fill the building with poisonous fumes in six seconds. No matter how much we practiced in the fire drills, nobody would make it out alive.

View attachment 108114
I used to have photos of my F550 service truck parked next to the crawler that moved the shuttle out to the launch pad at Canaveral. 😎😎😎😎😎

My F550 service truck looked like a Tonka truck 🤣😂🤣😂🤣😂🤣
 
  • Like
Reactions: 1 user

xrocketengineer

Well-known member
Lifetime Member

Equipment
BX1880, FEL, Grapple, 36 in. Forks, 48in. MMM, Quick Spade, Ripper
Nov 14, 2020
749
648
93
Merritt Island, Florida
I still have my pictures and the truck on my last work day. Fortunately for me, both Atlantis and Endeavour where at the pads and fully visible at the time.
100_0172.JPG
100_0179.JPG
100_0170.JPG
100_0173.JPG
 
Last edited:
  • Like
  • Love
Reactions: 13 users

Outnumbered

Well-known member

Equipment
Kubota L3901, FEL, BB1260, RCF2060, FDR2572, Titan Forks, Caryall, 5' Tiller
Oct 26, 2019
214
376
63
Moseley, VA
Back in 1980 and 19 years old I was making a whopping $4.10 per hour as a first year electrical apprentice at a power plant. We were working on installing a precipitator on a coal fired generator at a power plant I volunteered to help run the cable tray for the power up the side of the precipitator hanging from the basket of a crane up to about 250 feet from grade. I did it for the money (high pay) another $2.50 per hour as it was like time and a half all the time. I am in my 60's now and wonder what the hell I was thinking. I saw some crazy crap on that job and unfortunately one fatality.
 
  • Like
Reactions: 1 user

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
  • Love
  • Haha
Reactions: 1 users