Slip Clutch assy for LandPride 1860 rotary cutter

pinkerpv

Member

Equipment
3800, rtv1140CPX
Jul 13, 2016
35
2
8
MADISON, ALABAMA, USA
I have an 1860 LandPride rotary cutter with the slip clutch assy for the power takeoff drive shaft. Over the years the assy has worn and now the clutch assy wobbles and causes the drive shaft to wobble. I want to buy just the part of the assy that is worn but it costs $350+. A new clutch assy is $450; however I have found an aftermarket assy that should fit for $200+. The part i need is a solid cast part machined for the gearbox shaft. It has a hole thru it for the bolt to hold the assy to the shaft.

My question is does anyone know of a salvage yard for tractors and specifically Landpride equipment. I have found a few on the webb but no parts for me.
 

JimmyJazz

Well-known member

Equipment
B2601
Aug 8, 2020
1,219
739
113
Pittsburgh, Pa
At the risk of stating the obvious have you checked Amazon? There are many PTO slip clutch assemblies being offered at the sub $100 prices point. Good luck.
 

Mitjam

Active member

Equipment
M-108, M6-111, Lx3520, Rtv-520 and LandPride implements
Jan 14, 2013
233
244
43
Edmonton, Alberta, Canada
I have an 1860 LandPride rotary cutter with the slip clutch assy for the power takeoff drive shaft. Over the years the assy has worn and now the clutch assy wobbles and causes the drive shaft to wobble. I want to buy just the part of the assy that is worn but it costs $350+. A new clutch assy is $450; however I have found an aftermarket assy that should fit for $200+. The part i need is a solid cast part machined for the gearbox shaft. It has a hole thru it for the bolt to hold the assy to the shaft.

My question is does anyone know of a salvage yard for tractors and specifically Landpride equipment. I have found a few on the webb but no parts for me.
Hi there like Jimmyjazz said there are quite a bit of options without going to dealer. Something like the pics I uploaded is what you’re looking for. As long as you buy a cat 1 should be ok. It will either be attached from the u joint with a roll pin or a spring assisted pin. If there is wobble there is a chance the u joint may be failing. Sometimes you can find a whole pto assembly cheaper then trying to replace each u joint and clutch assembly. Good luck
 

Attachments

pinkerpv

Member

Equipment
3800, rtv1140CPX
Jul 13, 2016
35
2
8
MADISON, ALABAMA, USA
At the risk of stating the obvious have you checked Amazon? There are many PTO slip clutch assemblies being offered at the sub $100 prices point. Good luck.
Already checked the webb including Amazon. Already found a replacement for $200+ which beats the $400+ from Landpride. looking for a salvage yard to get the part even cheaper.