Share your lighting setup!

[nerwin]

I will definitely be interested in wiring up additional lighting. I've done a lot of professional wiring for lights on trucks and side by sides. But never a tractor before so I'm looking for ideas! I seen a few use light bars, some use pods on the ROPS. For me personally, I'd love to wiring up lights that would light up the loader more and see the around it better.

What kind of lighting set up do you have on your machine?

 

[85Hokie]

Works well and lights up ..........everything!

 

[jyoutz]

Lightbar facing forward, flood/spot combo facing rear. You’re going to want a canopy anyway.

 

[je1279]

I have the bolt on hooks clamp mounts with forward and rearward facing led pods. Ran the wiring through the ROPS and out the existing holes in the sides.

 

[mcmxi]

I just have the factory installed front and rear halogen work lights on both tractors which are decent but not LED great. Basically they're good enough that installing the LED lights that I bought for the tractors is not a priority.

 

[rc51stierhoff]

Take your pick…

The set up on the B is what Tractor Mike has for sale…it’s held on by magnet and plugs into the OEM 12v jack on the tractor. It’s easy on and easy off and extremely bright. I’ve mowed the front yard in the dark before. The B is so bright yours eyes have trouble to readjust when you look back to back up…I plan to put some rear facing lights on similar to the set up I have on the Mx. the lights on the MX are all hard wired in, but would not be easily removed.

 

[Oleracer]

ROP POLICE have a fit putting wiring inside. . NASCAR has drilled my rollcages to check for correct .095. So pretty sure 1/8 hole i am good
Cheap
Lights on Amazon cheap….use them on lots of plow trucks zero fails

 

[Bearcatrp]

Light bar that plugs into a cigarette lighter (if you have one) is the fastest and easiest to do. Mine are on the ROPS and gives plenty of light. Wish I had 2 cigarette lighters so I could put one facing the rear.

 

[je1279]

Light bar that plugs into a cigarette lighter (if you have one) is the fastest and easiest to do. Mine are on the ROPS and gives plenty of light. Wish I had 2 cigarette lighters so I could put one facing the rear.

You can get a two-way splitter as long as you keep the total amperage draw below the circuit rating. Just don't go all Clark Griswold on it and you should be fine.

 

[nerwin]

Or like this:

Honestly, looks awesome. Sadly its an image I created using AI.

 

[WI_Hedgehog]

Or like this:

View attachment 142563

Honestly, looks awesome. Sadly its an image I created using AI.

That's a nice Lamborghini interior, though I'm not sure if putting lights in the front visor area shining into the operator's eyes are a good thing but it does make the back of the cab look nice...however it seems AI isn't smart enough to put the beacons above the top of the work lite rack, which is a violation....