Rubber pads for outriggers

OntheRidge

Well-known member
Lifetime Member

Equipment
Kubota L47 TLB, Homestead 55" grapple, LP 1684 rear blade, WR Long 84" snowplow
Nov 1, 2020
330
385
63
25427
Anyone have a source for the rubber pads that go on outrigger shoes to protect surface? I believe Kubota part # is L9467. BH77 backhoe. List for these is $260, seems a bit steep. Right now I have a couple pieces of 2 x 4 screwed on but I doubt it will last long. Needed something to protect drive, it's what I had handy. Thanks everyone!
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,769
2,581
113
Bedford - VA
See if you can find a piece of rubber mat - like a horse stall mat , or even an thick innertube - cut the piece out and secure it TO the 2x4 and then have it where the rubber can be replaced when need be.
 

Fordtech86

Well-known member
Lifetime Member

Equipment
L3200
Aug 7, 2018
4,976
5,917
113
Pineville,LA
 
  • Like
Reactions: 1 user

kubotafreak

Well-known member

Equipment
GRAND l6060, L3560, B6100, gr2100, tg 1860, g1800, g1900, g2160
Sep 20, 2018
1,049
394
83
Arkansas, US
I thought the same initially. Then once you consider they are 4 welded brackets, cut tire sidewalls, and the associated hardware. It is just easier to be done with the oem piece. The backhoe places substantial weight on these parts. It is welded steel and Kevlar reinforced tire rubber for a reason. There is plenty of other things to save a buck on... Keeping the rubber from ripping off will be a challenge.

Install all the accessories yourself. $$
Do your own maint. $$$
 
Last edited:
  • Like
Reactions: 1 user

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
Anyone have a source for the rubber pads that go on outrigger shoes to protect surface? I believe Kubota part # is L9467. BH77 backhoe. List for these is $260, seems a bit steep. Right now I have a couple pieces of 2 x 4 screwed on but I doubt it will last long. Needed something to protect drive, it's what I had handy. Thanks everyone!
See here. I just got them about a month ago. Quite happy with flippadinternational. See post #6 for actual pics.

edit. Sorry FordTech...didn't see your post.

 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,577
2,636
113
Peoria, AZ
Local backhoe guy used to make his own from old tires & "gators" off the side of the highway,
but he had a bandsaw you could feed a Volkswagon through- without that, I'm sure it would be a giant PITA.
 
  • Like
Reactions: 1 user

Smokeydog

Well-known member

Equipment
M59, B26 grapples, backhoes, tillers, graders, diesel atv
Jun 2, 2020
681
638
93
knoxville, Tennessee
My B26 bought used came with them. Impressed how well they gripped off-road. Also the couple inches of lift helpful.
Wanted some for the M59 backhoe. High $$$ OEM had me looking for alternatives or diy. Finally found some OEM on eBay for $90.
Don’t have many hard surfaces to protect but like extra grip they provide. If they hadn’t came with one backhoe I wouldn’t have know how useful their addition would be.
Highly recommend even at dealer cost.
 
  • Like
Reactions: 1 users