Driving up using the loader to get the front tires in place would work, but unloading presents a new problem. You're dropping off that 7"....might be fun!
Ramp recommendations
- Thread starter timsch
- Start date
Driving up using the loader to get the front tires in place would work, but unloading presents a new problem. You're dropping off that 7"....might be fun!
Runs With Scissors
Well-known member
Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
However, none of this talk about “trailer loading” would be complete without a visit from “our Boy"
https://www.youtube.com/shorts/ex6lYkjSoFs
https://www.youtube.com/shorts/ex6lYkjSoFs
With the size of the rear tires, the drop would be negligible by the time they cam over and drop to the ramps.
Yeah, boy!!
Looks like he's just using the expanded metal mesh on a frame foldsup ramp to load that thing. The type of ramp I wouldn't think would be for more than an ATV or mower....
If your willing to bump up the plastic with 2X's just build the whole ramp out of 2X12's . . .
That the same video I posted here earlier ...
That the same video I posted here earlier ...
I thought about it, but by then it'd be pretty heavy. Half plastic and half wood would be a little more manageable.
Yeah, it wasn't the 1st time. I just hadn't noticed the ramp he was using when I saw it before.
Yeah, it wasn't the 1st time. I just hadn't noticed the ramp he was using when I saw it before.
Runs With Scissors
Well-known member
Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Thats the same type of ramp that I have been using for my 2501 for the pst 5’ish years.
So far, so good!!!
However, I would have added a "Double Arabian" to my dismount (you know…to impress the judges
)