Questions about an LX3310

[kennykustom]

Looking at a 2020 Lx3310.
Comes with a big front blower and rear mower.
Seller doesn't know much about it, and am wondering about 2 pictures.
There is a switch on the loader control and 4 hydraulic connectors out back.
Can I assume 3rd function up front?
I've also only seen 2 hydraulic connections out back.... Not the 4.
Just a new guy looking for a tractor so don't destroy me E too much..

 

[RMS]

The switch on the loader stick appears to be for a diverter valve. On my lx2610, this is used for the hydraulic snowblower chute controls. One direction is for left/right direction and the other is for up and down deflection.

 

[kennykustom]

The switch on the loader stick appears to be for a diverter valve. On my lx2610, this is used for the hydraulic snowblower chute controls. One direction is for left/right direction and the other is for up and down deflection.

Is a diverter valve the same as a 3rd function ?

 

[RMS]

Is a diverter valve the same as a 3rd function ?

No, the diverter uses the same hoses to switch between two fubction, a 3rd function valve adds another set of hydraulics to run a separate implement like a grapple.

 

[Shekkie]

I can’t think of a reason for a 3rd function without a loader.

 

[kennykustom]

I can’t think of a reason for a 3rd function without a loader.

It will come after the tractor purchase.

 

[AdmiralS]

Also, those rear remotes are NOT factory/Dealer. The Dealer install will look like this. I have 2 rear remotes for a total of 4 connections.

 

[kennykustom]

Also, those rear remotes are NOT factory/Dealer. The Dealer install will look like this. I have 2 rear remotes for a total of 4 connections.

View attachment 85868

Is that a bad thing ?

 

[BAP]

I can’t think of a reason for a 3rd function without a loader.

Looks like it is to run the hydraulic spout deflector on the snowblower

 

[Daferris]

Those rear remotes are Kubota ones. The ones used on cab tractors are different than the ROPS ones.

 

[LFP57]

Also, those rear remotes are NOT factory/Dealer. The Dealer install will look like this. I have 2 rear remotes for a total of 4 connections.

View attachment 85868

No, these are for the CAB models only, the open station are mounted down below just like in the photo.

 

[AdmiralS]

Thanks. Thought they used the same parts on both

 

[kennykustom]

Those rear remotes are Kubota ones. The ones used on cab tractors are different than the ROPS ones.

Great ! Thanks for clarifying.
Regarding those rear remotes, I do not see any extra controls for the remotes in the cab ?

 

[TheOldHokie]

Also, those rear remotes are NOT factory/Dealer. The Dealer install will look like this. I have 2 rear remotes for a total of 4 connections.

View attachment 85868

The remote valves are factory for a ROPS machine. The valves are the same but the outlets are base mounted to the work ports on the valves rather than on the back using hoses and push/pull couplers and mounting blocks like on your cab tractor.

Dan

 

[Daferris]

Great ! Thanks for clarifying.
Regarding those rear remotes, I do not see any extra controls for the remotes in the cab ?

The rest remotes levers are top of fender behind the 3pt control. Just in front of the ROPS and the cell phone holder

 

[nbryan]

The switch on the loader stick appears to be for a diverter valve. On my lx2610, this is used for the hydraulic snowblower chute controls. One direction is for left/right direction and the other is for up and down deflection.

My loader hydraulic line connectors are what my B2782B snow blower's chute rotation and hitch lift cylinder are connected to. The loader curl function lines power the chute rotation, and the boom lines the lift cylinder.

 

[Snowman7]

With the exception of the hydro whine, I love mine

 

[Snowman7]

Did you buy the LX?

 

[kennykustom]

Did you buy the LX?

Not that one, but I did pick up a new 21, LX2610SU

 

[Snowman7]

Not that one, but I did pick up a new 21, LX2610SU

Congratulation, have fun