QH15 pins

Lonesouth

New member
Nov 24, 2021
26
23
3
Tallahasee
I just picked up a QH15 for $250, but the seller did not include the pins. I found the part number, 310-020S and messicks has them for $20 each, but I figured I would check if there is a cheaper alternative available. Since these aren't bolted to the adapter, I figure more than one person has had a pin walk off.
 

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,386
1,811
113
Western MT
Are you talking about the pins that holds the top hook on? A few of us have replaced those with bolts. They are 1/2 inch. I used 2 3/4 inch ones and grade 8. You probably could get by with shorter ones. If you have QH compatible implements, you won't need to adjust the height once set. I paid $10 for nuts, bolts, lock washers at the local hardware store. That was for two sets.
 
  • Like
Reactions: 1 user

Bmyers

Well-known member
Lifetime Member

Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
May 27, 2019
3,306
3,888
113
Southern Illinois
According to the part number you are talking about part number 7 on the picture below

1643063318221.png


1643063394247.png
 

i7win7

Well-known member

Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
Feb 21, 2020
3,379
3,982
113
Central, IL
Think a 7/8" bolt works or just use 2 cat1 implement pins, only a couple bucks each
 

leveraddict

Well-known member

Equipment
2017 BX23S 60" LP BoxBlade 54" mower 60" BackBlade EA 12" 1 bottom plow & Forks
Apr 1, 2019
907
592
93
NEPA
Go to Tractor Supply Store!
 

RalphVa

Well-known member
Jan 19, 2020
738
320
63
Charlottesville
You can get pin #6 MUCH cheaper at TSC. My HF QH had those push-on type pins (vs. the #6 that snaps back). Lost one of those, and the large pin almost came out. Replaced with a lookalike to #6 (from TSC).

I'd recommend getting some silver tape and taping over the #6s after they're snapped flat. That what I just did in moving the QH from the JD to the B. Had them taped after that pin came out on the JD.
 

Lonesouth

New member
Nov 24, 2021
26
23
3
Tallahasee
I was able to use these in the lift arms


after mounting the QH15, I discovered that my bargain basement trailer hitch attachment was woefully too short to work, so I ordered a titan


Then I blacked out and woke up in the silly land of quick attach bushings. So I ordered two sets of these


PSA: make sure that second hand quick hitch has all the pins and bushings or it may not be quite the deal you think it is.