Pulled a Dumb One

Outnumbered

Well-known member

Equipment
Kubota L3901, FEL, BB1260, RCF2060, FDR2572, Titan Forks, Caryall, 5' Tiller
Oct 26, 2019
217
381
63
Moseley, VA
Public Service Announcement......Safety, Safety, Safety.....
Decided it was time to sharpen the blades on the finish mower. I have a spare set so it was more of a swap with sharp for dull. Took all the normal precautions, jack stands under mower and gloves. Finished and removed my gloves then the 19mm socket rolled back under the mower. I crawled back under to grab it and hit my elbow on the ground causing my arm to pivot and you guessed it ran my middle finger right into the sharp blades, at least the bone stopped the damage o_O. Well a $25 copay and 6 stitches later at the local urgent care it a reminder that it is easy to get hurt guys. I will now be flipping everyone off for the next 10 days with this shiny aluminum splint on my finger. Be careful when working on these pieces of machinery.
 
  • Like
Reactions: 5 users

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,769
2,581
113
Bedford - VA
Takes a good man to tell all what we do - and I know full well ALL OF US HAVE stories that we could tell!

Glad it was just a few stitches - and that finger will heal up just fine. And you are correct on being smarter and not so impulsive.

Now what I want to know is this ...........

What did the wife say? You get any sympathy or like some wives would say - deserves you right! :ROFLMAO:
 
  • Like
Reactions: 2 users

Outnumbered

Well-known member

Equipment
Kubota L3901, FEL, BB1260, RCF2060, FDR2572, Titan Forks, Caryall, 5' Tiller
Oct 26, 2019
217
381
63
Moseley, VA
Yeah, she has given me a hard time. Fortunately she does not freak out with small things like this.
 

Bee-Positive

Member

Equipment
BX1880
Nov 16, 2022
41
78
18
Amsterdam, NY
OMG! - 6 stiches on a finger must be a good size cut, ouch! As 85hokie says we all have similar stories. I just hope it's not on the hand that holds the TP. LOL
 

jaxs

Well-known member

Equipment
B1750HST
Jun 22, 2023
754
568
93
Texas
OMG! - 6 stiches on a finger must be a good size cut, ouch! As 85hokie says we all have similar stories. I just hope it's not on the hand that holds the TP. LOL
Yea but we are too embarrassed to talk about them.
 
  • Like
Reactions: 1 user

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,896
2,322
113
central ct
Be proud of every scar on your heart, each one holds a lifetime’s worth of lessons.
– Wallace Stegner

and on the rest of your body too
 

Runs With Scissors

Well-known member

Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Jan 25, 2023
2,513
2,916
113
Michigan
That sucks, but we have all had accidents.

Glad your going to be alright.

Since "Scars are the tattoos of Warriors", I hope it leaves a "big ass scar" for you.(y)(y)

The last time I had surgery I asked the surgeon to sew me up so that it would leave a cool scar.......apparently that surgeon did not take requests,... I can barely see it now.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,241
5,422
113
Chenango County, NY
Glad all is going to be okay (after 7-10 days with sutures).

We’ve all been there. In my adult years I always took the sutures out myself. More experience at it than I care to admit

Some of the OTT old timers might remember my paver patio project.

Smashed my thumb with a 4# dead blow hammer, and posted photographic evidence of same here on OTT.

Yeah, it was a dumb one….
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,051
3,323
113
Texas
That sucks, but we have all had accidents.

Glad your going to be alright.

Since "Scars are the tattoos of Warriors", I hope it leaves a "big ass scar" for you.(y)(y)

The last time I had surgery I asked the surgeon to sew me up so that it would leave a cool scar.......apparently that surgeon did not take requests,... I can barely see it now.
I had an umbilical -hernia repaired…and with my stomach completely covered in bandages… when the Doc checked-in on me a few hours after recovery…thinking I was being “clever”….. I asked him “will I still look good in a Speedo?” ….…. he answered:

”You’ll look as good as you ever did!”.

:ROFLMAO: :D:ROFLMAO:
 
  • Haha
Reactions: 1 users

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
3,032
2,084
113
Edgewood, New Mexico
Public Service Announcement......Safety, Safety, Safety.....
Decided it was time to sharpen the blades on the finish mower. I have a spare set so it was more of a swap with sharp for dull. Took all the normal precautions, jack stands under mower and gloves. Finished and removed my gloves then the 19mm socket rolled back under the mower. I crawled back under to grab it and hit my elbow on the ground causing my arm to pivot and you guessed it ran my middle finger right into the sharp blades, at least the bone stopped the damage o_O. Well a $25 copay and 6 stitches later at the local urgent care it a reminder that it is easy to get hurt guys. I will now be flipping everyone off for the next 10 days with this shiny aluminum splint on my finger. Be careful when working on these pieces of machinery.
I had a similar shop incident cutting my middle finger on some sharp steel. Turns out that it cut a tendon. The ER sewed me up, then I went for surgery the next day. I had an even larger splint and flipped people off for the next month.