Spent a good chunk of the day prepping "OJ" (Kubota BX24) for the winter months. Gave everything a good power wash. All fluids checked / topped up. Discovered one bucket pin to arm just about out of its bore, haven lost its keeper pin / bolt at some point. That taken care of, located all the grease fittings from top to bottom gave each of those a shot or two. Since I don't care to drive these days, &, being the weekend not usually able to have a volunteer driver come from several agencies. During the week can be bad enough. Anyways, I had been thinking of giving the headlight housings a good polishing for some time, since todays was so nice, warm set about to do just that. Not having a store-bought kit handy, set about experimenting. I found a box of Calgon Bath beads, a staple of Bonnies (rip). More of a powder really with just enough grit like a mild rubbing compound. Anyways, I spent perhaps 10 min scrubbing with the mixture each light. Rinsed & dried both, then, followed up with Finish Jet-Dry. I'm really happy with the results, wish I had snapped a before shot. Sadly, now that it's dark unable to get the after. We'll see how they look come tomorrow hopefully able to get a shot for the Orange Community. Anyways, Others may have an interest when in a pinch. The Calgon also seemed to work well on the plastic hood removing ground in stains. I worked the dash lense as well, cleaned-up nicely using both products.