Oil indicator light comes on and stays on

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,225
6,394
113
Sandpoint, ID
Could be low oil pressure from a cam plug that has come out. ;)
 

Eastfork Kubota owner

New member

Equipment
L2201
Oct 13, 2019
2
0
0
Brevard,NC, USA
It now comes on within a minute or so after I first start it up- Originally I thought it might have something to do with oil and filter so I changed both the oil and filter and light still comes on.
 

eserv

Well-known member

Equipment
BX24, A1000 Kubota Generator
May 27, 2009
2,140
139
63
Hardisty, Alberta
It now comes on within a minute or so after I first start it up- Originally I thought it might have something to do with oil and filter so I changed both the oil and filter and light still comes on.
The oil pressure light is there to warn you if the engine has low oil pressure. I would assume it is working properly and check the oil pressure with a mechanical guage before I would assume it was just faulty. Making a mistake here could cost you the engine!