Mixing UDT fluid
- Thread starter Mudball
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It won't hurt it to mix the two, but if you notice it start getting nosier, especially with the dropping temps not be alarmed as it's normal.
I would suggest you stick with SUDT2 on the next fluid change.
I would suggest you stick with SUDT2 on the next fluid change.
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
If your new tractor is anything like my BX2360, when I did do the first change of hydraulic fluid, it got much quieter.
Like Wolfman said, they can be pretty noisy at first......
Sent from my iPhone using Tapatalk
Like Wolfman said, they can be pretty noisy at first......
Sent from my iPhone using Tapatalk
They all come prefilled with super UDT2 if in the USA. I do not know how the non USA tractors are done.
Mixing isn't much problem-unless you live in extreme cold climates or extreme hot climates. Then it can cause some noise-and sometimes some weird operation if the temp is extreme enough. RTV's especially-they should never use anything but super UDT2-and especially the RTV500!
Mixing isn't much problem-unless you live in extreme cold climates or extreme hot climates. Then it can cause some noise-and sometimes some weird operation if the temp is extreme enough. RTV's especially-they should never use anything but super UDT2-and especially the RTV500!