I had an electrical fire on my M5660 and replaced the entire harness, fuel injectors and various sensors that were burnt.
However I am getting the following ERROR on the display:
ERROR-60 Analog reference supply voltage +5V trouble
I am wondering if this is on the Engine ECU (in front of the tractor) or most likely the Main ECU (under the steering column; see picture)
Also: the engine cranks and fuel gets all the way to the input to the fuel rail but not to the individual injector lines.
I would assume it has a fuel shutoff solenoid but can't find it on the parts list.
However I am getting the following ERROR on the display:
ERROR-60 Analog reference supply voltage +5V trouble
I am wondering if this is on the Engine ECU (in front of the tractor) or most likely the Main ECU (under the steering column; see picture)
Also: the engine cranks and fuel gets all the way to the input to the fuel rail but not to the individual injector lines.
I would assume it has a fuel shutoff solenoid but can't find it on the parts list.
Attachments
-
472.3 KB Views: 61