LX2972???? Front Mount K Connect snow Blade???

[Victor Machine Works]

Just a quick question, Has anybody ever come across one of these blades?, Does Kubota still make them?, I cant find much info on them let alone find one for sale at a reasonable price. One website has one listed for $4300!!!, That seem absolutely insane to me considering my rear blade with hydraulic angle kit was under $1500. I think that I would be vary interested in one, seems like a no brainer if you already have a K connect to have one of these as a second option but not at $4300??........ I guess that that was a few questions but this one has me biffled?

 

[GreensvilleJay]

'for sale' price(MSRP) has nothing to do with reality.... kind of a 'supply and demand' deal. Someone has the supply and they demand a price. Clever folks MAKE their own , or repurpose other stuff. others have to 'pay the piper'.
That snow blade might be listed under 'RTV /ATV' section of products ??
What baffles me is why a manufacturer doesn't have logical model numbers ? Seems Kubota have BOTH a tractor and a blower with essentially the SAME model code.
oh well, make life interesting... especially when you need a part !

 

[Victor Machine Works]

'for sale' price(MSRP) has nothing to do with reality.... kind of a 'supply and demand' deal. Someone has the supply and they demand a price. Clever folks MAKE their own , or repurpose other stuff. others have to 'pay the piper'.
That snow blade might be listed under 'RTV /ATV' section of products ??
What baffles me is why a manufacturer doesn't have logical model numbers ? Seems Kubota have BOTH a tractor and a blower with essentially the SAME model code.
oh well, make life interesting... especially when you need a part !

I have thought about building my own blade mount for the K connect but there is some weird geometry in it, (compound angles and such), defiantly doable just not sure i want to tackle it. Do they use the K connect on there UTV's? I hadn't considered looking there.

 

[DustyRusty]

I bought mine a couple of years ago and it was barely used. I just sold my 5' SSQA blade on Facebook Marketplace for $1900, because I only used it once or twice for an early or very late snowfall after the snowblower was removed. It shouldn't be that difficult to make one yourself if you buy a blade from a truck snowplow and then purchase the K connect hardware, which isn't inexpensive, but is available in parts. If you need a blade, I have some 8' NOS blades from the 1970s that never were sold when I closed my truck equipment business. If I were going to build my own, I would start with a Meyers blade since they aren't that heavy a blade if you had a BX tractor. Since you have an L series tractor, you can use some of the heavier blades that are available out there.

 

[GreensvilleJay]

I assume you have the K-connect snowblower , so you already have a good 'template' for the weird and funky angles. I usually make a 'pattern' out of wood, say 1/4" ply for 1/4" steel plate. Easier to cut and trim as required', THEN make from steel...cut once, weld once, it fits !!!

RTV-X Full Size Diesel Utility Vehicles | Kubota Canada

The Kubota RTV-X is the #1 Selling Diesel Pure Utility Vehicle in Canada since 2004*. And now, it’s better than ever.

www.kubota.ca

scroll down to check various plow....

 

[tthorkil]

I just looked at the build your Kubota for a LX2610 and the add-on price:

 

[Victor Machine Works]

I just looked at the build your Kubota for a LX2610 and the add-on price:
View attachment 118283

I also didn't think to look there, $2255 is definitely much closer to the ballpark, thank you!

 

[DustyRusty]

That is a straight blade, not a power-angle blade. The parts that you would need are quite expensive if you were to build your own.

Kubota LX2972 60" STRAIGHT BLADE (LX2972 72"" Straight Bladde) Parts Diagrams

Kubota Parts Catalog Lookup. Buy Kubota Parts Online & Save!

messicks.com

 

[icspots]

Just a quick question, Has anybody ever come across one of these blades?, Does Kubota still make them?, I cant find much info on them let alone find one for sale at a reasonable price. One website has one listed for $4300!!!, That seem absolutely insane to me considering my rear blade with hydraulic angle kit was under $1500. I think that I would be vary interested in one, seems like a no brainer if you already have a K connect to have one of these as a second option but not at $4300??........ I guess that that was a few questions but this one has me biffled? View attachment 118218

far as I know they still make them. That’s the style blade that should have gone onto my ~2020 BX, but I bought a used one from the prior model BX.
There was one posted with the full assembly and K connect on here in October for $1,700. It went fast. I got my older one for the same price. Had to get a couple of bits online, and change the connectors but it works fine. Would’ve been nice to have the newer style since I can’t have the loader on with the subframe attached with the older style.

$4,300 is super pricey. Don’t be surprised that niche attachments designed for specific machines have higher costs than a relatively generic 3pt attachment rear blade that can be used across pretty much anything.