Log Tongs for my Boom Pole

Trimley

Well-known member
Lifetime Member

Equipment
BX23SLSB-R-1 plus additions
Jul 25, 2023
1,185
877
113
PNW-WA
Found a nice vintage Tong Set on FleaBay for $31.23/shipped.

For use with my Boom Pole.
1000016186.jpg
1000016187.jpg

Edited to add> This will get the below type of cleaning method.
 
Last edited:
  • Like
Reactions: 8 users

pigdoc

Active member

Equipment
G1800S L2500
Aug 19, 2022
279
209
43
SE Pennsylvania
Very nice!
I'm envious!

I was JUST thinking today that I really need one of these.

I have measured and marked about 50 mature Black Birch trees on my property that I want to harvest this winter. I'm going to use the L2500 to skid them out to the road, and probably load them too (need some forks). I have about 9000BF total (1/4" rule). The biggest tree is almost 500BF (1/4" rule) and will weigh about 1.5 tons.

My dream is to tear out the wall-to-wall carpeting, and replace with Black Birch flooring. But, rather than worry about the drying and machining, I'm just going to sell the saw logs, and then turn around and buy ready-to-install flooring. I need about 2000SF of flooring. There's a place in Connecticut that has a nice line...

-Paul
 
  • Like
Reactions: 1 user

Trimley

Well-known member
Lifetime Member

Equipment
BX23SLSB-R-1 plus additions
Jul 25, 2023
1,185
877
113
PNW-WA
Very nice!
I'm envious!

I was JUST thinking today that I really need one of these.

I have measured and marked about 50 mature Black Birch trees on my property that I want to harvest this winter. I'm going to use the L2500 to skid them out to the road, and probably load them too (need some forks). I have about 9000BF total (1/4" rule). The biggest tree is almost 500BF (1/4" rule) and will weigh about 1.5 tons.

My dream is to tear out the wall-to-wall carpeting, and replace with Black Birch flooring. But, rather than worry about the drying and machining, I'm just going to sell the saw logs, and then turn around and buy ready-to-install flooring. I need about 2000SF of flooring. There's a place in Connecticut that has a nice line...

-Paul
I was a flooring contractor for 37 years. Anymore, I claim to know nothing but how to walk on it!
 
  • Like
Reactions: 1 user

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,998
2,043
113
Edgewood, New Mexico
Very nice!
I'm envious!

I was JUST thinking today that I really need one of these.

I have measured and marked about 50 mature Black Birch trees on my property that I want to harvest this winter. I'm going to use the L2500 to skid them out to the road, and probably load them too (need some forks). I have about 9000BF total (1/4" rule). The biggest tree is almost 500BF (1/4" rule) and will weigh about 1.5 tons.

My dream is to tear out the wall-to-wall carpeting, and replace with Black Birch flooring. But, rather than worry about the drying and machining, I'm just going to sell the saw logs, and then turn around and buy ready-to-install flooring. I need about 2000SF of flooring. There's a place in Connecticut that has a nice line...

-Paul
Log tongs are nice for sorting logs at a milling location, but cable chokers are better for skidding logs. Pull from your drawbar, not 3ph.
 
  • Like
Reactions: 2 users

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,803
4,255
113
Central Piedmont, NC
I have a pair pretty similar to that. Been using them off and on about 50 years. My father and unknown ancestors before him used them as well. They’re very handy in some situations. Can significantly increase efficiency as well. If you treat them like they’ll hold a log as securely as a hydraulic grapple/thumb or a choker chain… well that’s just not very bright. But the whole subject of tractors and similar equipment is that way. Use it right: good 👍🙂. Use it wrong: bad 👎☹.

Nice find.
IMG_1377.jpeg
 
  • Like
Reactions: 2 users

Trimley

Well-known member
Lifetime Member

Equipment
BX23SLSB-R-1 plus additions
Jul 25, 2023
1,185
877
113
PNW-WA
I have a pair pretty similar to that. Been using them off and on about 50 years. My father and unknown ancestors before him used them as well. They’re very handy in some situations. Can significantly increase efficiency as well. If you treat them like they’ll hold a log as securely as a hydraulic grapple/thumb or a choker chain… well that’s just not very bright. But the whole subject of tractors and similar equipment is that way. Use it right: good 👍🙂. Use it wrong: bad 👎☹.

Nice find. View attachment 116425
How true those words are. Relevant to everything, almost literally.

My being born and raised in times when the timber industry was boonin in my parts, I grew up around everything "timber", I may have been around the block a time or two 😉
 
  • Like
Reactions: 1 users

g_man

Well-known member

Equipment
L3010DT, M5640SUD, Dresser TD7G
Feb 3, 2023
156
710
93
NE Vermont
That's a very nice set of old tongs. They look small to me for something coming out of the PNW. I picture everything out there as big :) But they should be fine on your boom pole. Keep them them sharp.

gg
 

g_man

Well-known member

Equipment
L3010DT, M5640SUD, Dresser TD7G
Feb 3, 2023
156
710
93
NE Vermont
I used tongs before I got a winch.

TongsGrapple (6).JPG



gg
 
  • Like
Reactions: 1 users

Trimley

Well-known member
Lifetime Member

Equipment
BX23SLSB-R-1 plus additions
Jul 25, 2023
1,185
877
113
PNW-WA
My tongs will have minimal use, if at all. As a tool for someone living in the sticks, they're good to have around.
 

KKBL

Active member

Equipment
L2501 HST QA 525 loader, 42" forks, brush hog, grader/box/back blades
Jan 5, 2022
95
103
33
Girard, PA
We have used tongs with a boom pole for years - no problems. Make sure the logs you drag will not hit your PTO shaft.
 
  • Like
Reactions: 1 user

In Utopia

Active member

Equipment
L175 FEL
Apr 21, 2013
613
113
43
Utopia,Tx/Pasadena,TX
Used mine once trying to move power poles. Turned out to be a pain, went back to choking with cable on the winch mounted on my boom pole.
Sold the tongs.
 

g_man

Well-known member

Equipment
L3010DT, M5640SUD, Dresser TD7G
Feb 3, 2023
156
710
93
NE Vermont
I like mine for some things. I made an over the center latch to hold them open. Then I can drop them on a log and go w/o getting out of the seat. I made a little video the very first time I tried it out to see if it would even work.


TongsGrapple (1).JPG



TongsGrapple (2).JPG



TongsGrapple (3).JPG




gg
 
Last edited:
  • Like
Reactions: 5 users

Hkb82

Well-known member

Equipment
M7060, Ford 5600, can-am defender
Nov 17, 2021
387
312
63
42
Ontario Canada
I also made a set of scissors tongs thinking it would be way easier then choking all the time. They worked good but I still prefer to use logging chain and choker to skid logs from the bush. Choker never comes off but the tongs do from time to time.
 

Trimley

Well-known member
Lifetime Member

Equipment
BX23SLSB-R-1 plus additions
Jul 25, 2023
1,185
877
113
PNW-WA
I also made a set of scissors tongs thinking it would be way easier then choking all the time. They worked good but I still prefer to use logging chain and choker to skid logs from the bush. Choker never comes off but the tongs do from time to time.
Let's put it this way, Tongs are something I did not have and wanted. I have chains, cables, snatchblocks, winch, chokers and on an on. I use what works best. I work smarter> not harder.
 

Hkb82

Well-known member

Equipment
M7060, Ford 5600, can-am defender
Nov 17, 2021
387
312
63
42
Ontario Canada
Let's put it this way, Tongs are something I did not have and wanted. I have chains, cables, snatchblocks, winch, chokers and on an on. I use what works best. I work smarter> not harder.
I hear ya on that. That’s why I built mine. You got a sweet deal on a set of tongs and sure couldn’t go wrong for 30 bucks. No brainer if you ask me.
 
  • Like
Reactions: 1 user

KKBL

Active member

Equipment
L2501 HST QA 525 loader, 42" forks, brush hog, grader/box/back blades
Jan 5, 2022
95
103
33
Girard, PA
With some practice, you often don't have to get off tractor to grab a log and go. Saves time when moving lots of wood.
 

Trimley

Well-known member
Lifetime Member

Equipment
BX23SLSB-R-1 plus additions
Jul 25, 2023
1,185
877
113
PNW-WA
With some practice, you often don't have to get off tractor to grab a log and go. Saves time when moving lots of wood.
Right. Once they arrive..then cleaned up, I'll play with making (adding) a scissor cross-bar that holds them open until dropped on the log. Some chain on each side also...for flexible draft links....to keep them aligned.