Loader Mounted 2782B Snowblower

[Kubotank]

Does the frame stay on all the time? Did you use existing hole in the frame or did you have to drill new holes.
This is exactly the type of setup I am looking for. Being able to leave the loader frame on and use the front mount snow blower.

If you don't need your mid PTO for a mower or something else the subframe can stay on all the time.
I remove it during summer because I have a mid mount mower. It's really easy to remove and install and even if I wouldn't use the mid PTO, I would still remove it in summer because it lower the clearance under the front axle.
No i didn't drill any holes, the subframe is using the existing holes in the frame.

 

[Jsjac]

This is going to be one of the projects that I work on over the summer.
I have a land pride snow blower on the rear now.
I am going to try to make that work.

 

[Kubotank]

This is going to be one of the projects that I work on over the summer.
I have a land pride snow blower on the rear now.
I am going to try to make that work.

The 3pt rear blower may not work in front, you will need a reduction box because the mid PTO run at 2500rpm compare to 540rpm in the back.

 

[Jsjac]

I did not even think of that. I guess I will have to buy one of the blowers.
Maybe I can buy just the blower and not the whole kit?

 

[Orange1forme]

Looks like this is the OP.

At first I thought this was a strange idea, but with an explanation it seems like a good idea when done correctly.

 

[Kubotank]

I did not even think of that. I guess I will have to buy one of the blowers.
Maybe I can buy just the blower and not the whole kit?

a used 2782b snowblower should be fairly easy to find at a reasonable price.

 

[Jsjac]

I looked around on the interwebs and found a couple.
I will wait until winter is over to start looking.
If I have to buy new I will. Prefer not too,but ...