3 years old, 157 hours. After sitting couple of months, would not fire up so I cleaned fuel/water separator, bled the system per the manual. Next, would fire up then die after a few seconds. Tried again 2 more times after 30 intervals, same thing then nothing at all on 3rd time. Wound up bleeding it 2 more times and it finally started. Let it idle for a few minutes then increased to 1500, 2000 rpms, then let it run at 1200 for 5 minutes. Thought all was well. Next morning get ready to bush hog and same thing; won't start except for a few seconds and then nothing. Error Codes PO606, PO663, PO653, PO643, & PO380. Any ideas?
Thanks,
Bill Carr
Middle Ga.
Thanks,
Bill Carr
Middle Ga.