L3650 starter stud size ?
- Thread starter johnh25
- Start date
kubotafreak
Well-known member
Equipment
GRAND l6060, L3560, B6100, gr2100, tg 1860, g1800, g1900, g2160
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
How did you arrive at that information? I have not seen that type of information tied into the part number so you must have better information than I can find.
The nut that is called out for that stud is 02176-50100. Searching Google for that part number returns multiple results that include the thread size, M10x1.25.
Example-
The bolt for one hole of the starter is 01133-51030 . Searching Google for that part number returns multiple results that include the thread size and length, M10x1.25 x 30mm.
Example-
The stud's part number is 01517-71030. I used Messick's picture of the stud next to a ruler and drew parallel lines from the ruler at the start and end of the threads and came up with 42mm.
New info since I posted. 01517-71030 replaced 01517-51030.
01517-51030 search results show that it's M10x1.25x41mm so I was 1mm off.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
I was pleased that I could figure out LED equivalents for the tractor's lights.My bad, I'll do better next time.
Looks like a similar method to find starter bolt and stud specs, but much more involved.
Great pointers for all!