I have a L3350 with hydraulic shuttle shift. About a year ago while using my tractor, I lost all power to the wheels, no engine or PTO issues. I replaced my single stage clutch which was worn, and the release bearing. After putting it back together and starting it back up, my clutch pedal wouldn’t work, but I could still operate normally using shuttle shift, and did so for 6 plus months. I tore it back apart, and come to find out the tolerance on the release bearing was off, and was sticking to the hub. I replaced that, put it back together fire it up, and clutch is operating normally. However, now I have limited power to wheels. I can barely climb any inclines above 2nd gear, the tractor won’t move at all in 7th or 8th. The loader seems to be fine, and will still lift the front of the tractor up, and PTO seems to be operating normally. I have adjusted the clutch to specs, changed hydraulic fluid and filter. I am at a loss for where to go next, any help would be greatly appreciated.