L3301 3 point hitch parts

[thegeologist]

I've got an L3301 that I've been trying to get set up for 3 point attachments (it's got a backhoe on it now). Parts ASAP was able to find the lower draft arms, but no luck so far on the lift arms or top link. I've had no luck finding a diagram with the dimensions for those three parts so that I can try to find them elsewhere. Anyone have those dimensions or a link to a reference with those measurements? I had no idea this would be such a difficult quest! Even the dealer I got the tractor from grumbled about having to look up the parts. Any help would be appreciated!

Parts #1, 2, and 6 on the diagram.

 

[MOOTS]

Did you buy the tractor new from said dealer?

 

[thegeologist]

Did you buy the tractor new from said dealer?

Yes.

 

[MOOTS]

Yes.

Then they didn’t give you your 3 point parts. When backhoe was installed, 3 point parts should have been returned to you.

I’d start with your salesman. Then maybe shop manager. Bet they have them collecting dust somewhere.

 

[thegeologist]

Then they didn’t give you your 3 point parts. When backhoe was installed, 3 point parts should have been returned to you.

I’d start with your salesman. Then maybe shop manager. Bet they have them collecting dust somewhere.

They were provided, but are gone now.

 

[MOOTS]

They were provided, but are gone now.

Lift rod

Kubota Tractor L3301HST J11502 Lift Rod [New] ## S.No.;>=52907 | Kubota Tractor

Shop online for OEM J11502 Lift Rod [New] ## S.No.;>=52907 parts that fit your Kubota Tractor L3301HST, search all our OEM Parts or call at 888-458-2682

shop.kubotausa.com

Top link

Kubota Tractor L3301HST J10501 Top Link [New] ## S.No.>=88578 S.No.;>=88578 | Kubota Tractor

Shop online for OEM J10501 Top Link [New] ## S.No.>=88578 S.No.;>=88578 parts that fit your Kubota Tractor L3301HST, search all our OEM Parts or call at 888-458-2682

shop.kubotausa.com

No measurements, but there are the part numbers. Good luck.

 

[fried1765]

Lift rod

Kubota Tractor L3301HST J11502 Lift Rod [New] ## S.No.;>=52907 | Kubota Tractor

Shop online for OEM J11502 Lift Rod [New] ## S.No.;>=52907 parts that fit your Kubota Tractor L3301HST, search all our OEM Parts or call at 888-458-2682

shop.kubotausa.com

Top link

Kubota Tractor L3301HST J10501 Top Link [New] ## S.No.>=88578 S.No.;>=88578 | Kubota Tractor

Shop online for OEM J10501 Top Link [New] ## S.No.>=88578 S.No.;>=88578 parts that fit your Kubota Tractor L3301HST, search all our OEM Parts or call at 888-458-2682

shop.kubotausa.com

No measurements, but there are the part numbers. Good luck.

Prolly ain't gonna be cheap!

 

[thegeologist]

Prolly ain't gonna be cheap!

Not cheap at all. Hopefully someone has dimensions. I don't imagine that each tractor model has its own specialized hitch parts. There have to be cross-fitting parts. At least I hope so!

 

[fried1765]

Not cheap at all. Hopefully someone has dimensions. I don't imagine that each tractor model has its own specialized hitch parts. There have to be cross-fitting parts. At least I hope so!

I suspect that you will find this to be a dealer item only.
Consult a Kubota dealer for complete part numbers and cost.
The dealer "whole goods" system, through their SALES dept. MAY be of some $$ help.
Be prepared $$$$$ !

 

[hodge]

They'll be the same as an L2502 and an L3902, so go to the dealership and measure one of those.

 

[thegeologist]

With some poking around, it seems like the L3301 is basically the same as the L39 and L45 with the only difference being in the engines/hp. Is anyone familiar enough with these models to confirm that? If they're all basically the same setup, then it seems like this kit will work on the L3301.

3-POINT LINKAGE KIT (L39/L45)

3-POINT LINKAGE KIT (L39/L45)-L3961

www.hoober.com

 

[Fordtech86]

With some poking around, it seems like the L3301 is basically the same as the L39 and L45 with the only difference being in the engines/hp. Is anyone familiar enough with these models to confirm that? If they're all basically the same setup, then it seems like this kit will work on the L3301.

3-POINT LINKAGE KIT (L39/L45)

3-POINT LINKAGE KIT (L39/L45)-L3961

www.hoober.com

I think this kit does work, but I’m gonna tag @North Idaho Wolfman because I remember measuring the arms on my l3200 (pretty sure they are the same on the 3301) for him to verify on another members post like this. It’s on here somewhere if you want to search it.

edit: link to the thread

L3800 3point linkage stolen. Needing replacement.

I removed my 3point linkage to use the backhoe attacment on my l3800. When I got back to my trailer, someone had stolen all of it. Is there an aftermarket kit that can be bought? I've got to replace it with something. I need to bush hog some fields.

www.orangetractortalks.com

 

[North Idaho Wolfman]

Yes that kit does fit it like @Fordtech86 says.

There is very little difference in all the kits.

 

[jyoutz]

I

With some poking around, it seems like the L3301 is basically the same as the L39 and L45 with the only difference being in the engines/hp. Is anyone familiar enough with these models to confirm that? If they're all basically the same setup, then it seems like this kit will work on the L3301.

3-POINT LINKAGE KIT (L39/L45)

3-POINT LINKAGE KIT (L39/L45)-L3961

www.hoober.com

I know it’s the same as the L2501 and L3901. Those are the same machines with different engines. I’m not familiar with those other models that you cited.

 

[thegeologist]

Follow-up - Got the parts needed and everything fits and works great. I appreciate all the input here!

For my L3301, I got the 3 point hitch kit from Hoober and the telescoping stabilizer kit from eBay. Links to the parts below.

3 point hitch kit from Hoober: https://www.hoober.com/kub-l3961-3-point-linkage-kit-l39l45

eBay telescopic stabilizer kit: https://www.ebay.com/itm/354746717543

Thanks everyone!