L 245 engine

[jdharris]

im trying to overhaul L 245 pistons are to big

 

[mickeyd]

Welcome to the forum from Alabama. The pistons you took out are too big, or are the ones you are trying to put in are too big?

 

[D2Cat]

jd, you just trolling through? You just made a ridiculous statement with no question so.....probably so.

 

[Tomcat]

im trying to overhaul L 245 pistons are to big

 

[jdharris]

this is the first time ive done this so bare with me the standard pistons i bought from kubota are .006 bigger than the ones that came out of it. even without the rings they wont go in the sleeve. kubota says thats the only pistons for 1115 cc engine. i read this might not be a kubota engine but it says its 1101

 

[North Idaho Wolfman]

Ok I think I might have the answer for you...
I'm betting it's not .006 it's .060 and unless you bought the sleeves to match it will not fit.
I've never heard of pistons only being oversized by 6 One Thousandths.
But 60 One thousandths, yes.
How did you determine that you needed oversized pistons?
If it's a Kubota tractor it's a Kubota engine, look on the side of the block right behind the injection pump and hydraulic pump there will be the cast in CC's of the motor, it should read 1115cc.