Kubota b7100 4x4 Whats with this?

[BigRod]

Doing a standard clutch repair is no issue until I find it has a DH850B "455cc" engine so the issue im having is locating a pilot bearing very limited information not knowing what equipment it was installed originally. Any help please.

 

[D2Cat]

Might call Coleman Equipment in Lee's Summit, 816-491-eight eight nine six. Should be setting right there!

 

[North Idaho Wolfman]

All of the D650, D750, D850, D950 take the same bushing, I've never seen one take anything different.

Part Details | Coleman Equipment

 

[Mountainman]

Is the bushing to small for the hole? Some wear out and the shaft wobbling around in there will make the hole larger in which you'll have to have a machine shop make you one or replace flywheel. I have several flywheels if you need one

 

[North Idaho Wolfman]

Is the bushing to small for the hole? Some wear out and the shaft wobbling around in there will make the hole larger in which you'll have to have a machine shop make you one or replace flywheel. I have several flywheels if you need one

The pilot bushing doesn't seat in the flywheel on these engines, it seats in the back of the crank.
Worn pilot bushing hole is really difficult and costly to fix properly.
I've done a couple that I've used a boring bar rig on a running engine to over cut the hole larger and use a custom bushing, not a fun repair.

 

[Mountainman]

The pilot bushing doesn't seat in the flywheel on these engines, it seats in the back of the crank.
Worn pilot bushing hole is really difficult and costly to fix properly.
I've done a couple that I've used a boring bar rig on a running engine to over cut the hole larger and use a custom bushing, not a fun repair.

I stand corrected. Sorry long day. Thank you @North Idaho Wolfman for correcting me

 

[North Idaho Wolfman]

I stand corrected. Sorry long day. Thank you @North Idaho Wolfman for correcting me

Hey I get it, it's all good, I have those kind of days too.

 

[Runs With Scissors]

I've done a couple that I've used a boring bar rig on a running engine to over cut the hole larger and use a custom bushing, not a fun repair.

Please tell me you have pics/video of that?

That sounds cool as hell.

 

[North Idaho Wolfman]

Please tell me you have pics/video of that?

That sounds cool as hell.

Sadly no, I really need to get better a documenting the insanity!