I have some irretating noice when I enganged the pedal forward and reserve on my newly bought B 3150 . Only on H speed, the other two positions quite normal.
Irritate noice when forward/reverse H-speed B3150
- Thread starter K- fan since 1994
- Start date
I think what your describing is your hydraulic drive amd its normal. Called hydro whine.
Thank you for your answer. I´m taking over the Tractor in the end of March, and I may come back with other ? then, again thank you .
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
You might want to replace the transmission fluid with SUDT2 (synthetic oil). It supposedly has made a difference in the whining on the tractor.
Thank you for your advice, I´m going thru the hole Tractor when it´s delivered end of March, again thank you !
can we get a little more info? like do you know:
- does the noise change between a warmed up engine/oil and cold?
- is it worse in colder temps say at -30 versus say +15
- does it change if the operating rpm set low/med/high
- when engaging the "pedal" in high range are you feathering into it until machine is rolling or are you hitting the pedal hard and fast (like dumping a clutch on a sports car in 3rd gear at low rpm versus dumping in 1st gear at higher rpm )
- is this occurring when pointed uphill and downhill (aka worse when more load on it)
- do you have any equipment hooked to the back, are tires filled, etc...) also trying to asses a load thing in high range.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Evaluating sounds over text is like... well... Just not good.
Make a video / audio of it doing it and post it on Youtube and give us a link to see / hear it.
You could be having a normal HST whine or you could be having a host of other issues.
Make a video / audio of it doing it and post it on Youtube and give us a link to see / hear it.
You could be having a normal HST whine or you could be having a host of other issues.
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
@K- fan since 1994 is from Norway.
Bet it's cold there.
A video/audio would help, like Wolfman said.
If it's only in H range, he may need more engine RPM, or he's trying to do things in H range he should do in L range.
Maybe a change of fluid/filters would help too, as @Russell King pointed out.
Bet it's cold there.
A video/audio would help, like Wolfman said.
If it's only in H range, he may need more engine RPM, or he's trying to do things in H range he should do in L range.
Maybe a change of fluid/filters would help too, as @Russell King pointed out.