Hourmeter not working

torch

Well-known member

Equipment
B7100HSD, B2789, B2550, B4672, 48" cultivator, homemade FEL and Cab
Jun 10, 2016
2,621
871
113
Muskoka, Ont.
Did you leave the key on for the last 7.4 years?
 

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
5,248
1,927
113
Mid, South, USA
Have seen it before. Only choice is to replace the meter assembly UNLESS you know of an electronics guru that might be able to repair it.
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,054
3,326
113
Texas
Not a BX... but two hourmeter issues I've experienced have been:
Kubota: Mechanical (speedo) drive cable disconnected and/or broken.
Other: Electric-powered meter removed, checked on bench fine, reinstalled, works perfectly ...due to dirty electrical plug/contact. Cleaned with electronic cleaner and lubed with WD40-Gel or dielectric-grease.
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,774
2,583
113
Bedford - VA
My hourmeter is not working . It shows 65,191. no way this is right.
No that cannot be right! Seems like that was hooked up to a constant hot somehow! I would write down the info and pay attention to it being used...see if they jive with each other or simply replace the meter.

I bought an older pontoon boat a while back.... was under the dash, and kept hearing a ticking.....the hour meter was hooked directly to the hot lead feeding the gauges!!
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
2,949
1,401
113
Kansas City, KS
My hourmeter is not working . It shows 65,191. no way this is right.
It is a very rare fluke with the 50 series dash, had one go from 300 ish hours to 68,000 ish over the weekend. Boy, was he miffed!!!!!!! Over 5 years now and it has not clocked a tenth.