Help troubleshooting L4200 starter

Algottractor

New member

Equipment
Kubota L4200 w/ LA680 loader
Mar 29, 2016
3
0
0
Boca Raton, FL
Kubota L4200 tractor wouldn't start. A mechanic said the starter had voltage and must be bad. We found a new one online for a decent price. Easy install, but it still won't start.

It clicks hard when I turn the key so I think the starter solenoid is working but maybe not the motor. It won't crank even when giving the starter motor power directly with jumper cables and manually jumping the terminals on the starter.

The engine turns by hand on the crankshaft pulley so it's not locked up

Any ideas how I can continue troubleshooting?

Thanks
Al
 

rbargeron

Well-known member
Lifetime Member

Equipment
L5450, L48, L3250, L345 never enough attachments
Jul 6, 2015
1,171
238
63
western ma
Is the battery charged and in decent shape? Same battery being used to test for voltage? Clamps & connections clean?
 
Last edited:

ironpony

Member

Equipment
B7100
Mar 4, 2016
84
1
6
Lancaster Ohio
some times even with the solenoid clicking the contacts inside are not connecting, some solenoids can be opened up and the contacts replaced or cleaned.
 

Algottractor

New member

Equipment
Kubota L4200 w/ LA680 loader
Mar 29, 2016
3
0
0
Boca Raton, FL
Is the battery charged and in decent shape? Same battery being used to test for voltage? Clamps & connections clean?
It has an optima deep cycle battery and new terminal ends, clamped nice and tight.

However, as it sits now I think the battery is low. And for a while the tractor has had some charging issues as we had to put a charger on the battery periodically.

Whenever the battery got low I would just jump start it with a truck so I have been using that during my troubleshooting.

Al
 

Algottractor

New member

Equipment
Kubota L4200 w/ LA680 loader
Mar 29, 2016
3
0
0
Boca Raton, FL
some times even with the solenoid clicking the contacts inside are not connecting, some solenoids can be opened up and the contacts replaced or cleaned.
So that's one reason the new starter may not be working.

It looks brand new and functional, but maybe I will pull it back off and try and double check the function of the solenoid next.
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,202
6,725
113
Vilonia, Arkansas
Check your positive and ground cables. Could be a loose or corroded connection. Usually the ends are crimped or soldered on. Had many a cable develop an issue where the wires attach to the ends. Sometimes they intermittently drop power till bumped. Sometimes they cause the starter to click rapidly.



Sent from my iPhone using Tapatalk
 

rentthis

Active member
Lifetime Member
May 30, 2012
1,007
24
38
summerville,sc
Check you battery where it grounds to the frame. Sounds like you might have corrosion where it is bolted on. Take it loose and polish the surfaces.