Gator blades for bx80 with 60" mmm

[catalyst]

Anyone know the part # for the gator blades that fot the BX80 60" mmm? Looking to order a set and get them installed before spring. Searched the forums and only found older posts from 2006ish.

 

[Bulldog]

Don't know about gator, but I'd suggest looking at the Meg-Mo system. That's what I plan to switch to. If I didn't already have 3 sets of blades I would have already done it.

 

[catalyst]

Don't know about gator, but I'd suggest looking at the Meg-Mo system. That's what I plan to switch to. If I didn't already have 3 sets of blades I would have already done it.

Meg mo looks like its 299 for a set of blades. The gator blades look like they are under 50 per set. The meg mo blades are more than i was hoping to spend on blades.

 

[Bulldog]

They're not cheap but once you have them replacement cost would be low. I look at how many acres I cut each year with my hay mower and how long those last. A person could probably cut the rest of their life on one set of meg-mo blades.

 

[D2Cat]

Bulldog, I'm going to check them out for my Grasshopper 61" cut zero turn.

 

[Fordtech86]

Anyone know the part # for the gator blades that fot the BX80 60" mmm? Looking to order a set and get them installed before spring. Searched the forums and only found older posts from 2006ish.

Oregon 396-612 PK3 Gator G6 Blades -20 1/2" https://www.amazon.com/dp/B01CF16G3Q/ref=cm_sw_r_cp_api_i_nuYpEb7VKVNN8

Should be the blade you need