extra large stabilizers

[hodge]

I recently had a request for a set of stabilizers for an MX5100, but I didn't have large enough material, and hadn't worked on such a large set. I have since gotten some 2 1/2"x1 1/2" rectangular tubing and 7/8" x 2" flat bar. I have a friend with a John Deere 5300, which has turnbuckles. So, I made a set today for his tractor, as a guinea pig. I think they will hold- they are much more substantial than the factory turnbuckles, which have held up fine.
In the photos are a medium size stabilizer, which would work on a tractor up to about 30 hp, the unpainted extra large stabilizer for the JD, and one of my factory turnbuckles off of my B7100, for size comparison.
http://s65.photobucket.com/albums/h205/br549_red/?action=view&current=extralarge002.jpg

http://s65.photobucket.com/albums/h205/br549_red/?action=view&current=extralarge001.jpg

 

[dedgin]

do you make and sell the small stabilizers, I would like to get a set fr my b7510 a little later

 

[hodge]

do you make and sell the small stabilizers, I would like to get a set fr my b7510 a little later

I will pm you.

 

[skeets]

Good lord almighty,, my nuts just hit the ground looking at them things,,what do they weigh?????

 

[G-Man]

do you make and sell the small stabilizers, I would like to get a set fr my b7510 a little later

I have a B7500 and got a set from Mark and these where one of the best accessory that I bought and Mark does very good work. I have the medium set and they work perfect.

 

[hodge]

Good lord almighty,, my nuts just hit the ground looking at them things,,what do they weigh?????

Wow, Skeets, that's farther than I wanted my imagination to go...
They weighed about 12 pounds a piece. It's the 7/8" x 2" cold rolled flat that makes them a chunk.
Thanks for the plug, G-man.
I just mailed a set off today to Napa, CA, for a B2150. It always amazes me how many different models that Kubota has made over the years.