Emissions delete kits??

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
3,299
2,323
113
Edgewood, New Mexico
Hmmm, this makes me wonder if mine has a problem. It runs fine and so far seems to regenerate every 20-30 hours.
That seems a little often. Mine regenerates every 50-60 hours.
 
  • Like
Reactions: 1 user

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
3,059
1,505
113
Kansas City, KS
Hmmm, this makes me wonder if mine has a problem. It runs fine and so far seems to regenerate every 20-30 hours.
Have you mentioned this concern to your dealer? If so, they should have informed you of this TSB to rectify the situation.

TSB-2022-035-E-R2 June 27, 2022 Revised: February 13, 2023

FIX AS FAIL EXTENSION: B-Series; LX3310 Strong Exhaust Gas Smell
Repairs described in this bulletin may be made only in the event of a failure.
KOBD ACE must be used when installing the kit.


Product Line: B-Series Model: LX3310 Serial Numbers Affected: Model Serial Numbers LX3310 ROPS, LX3310 CAB 10001 to 14735

Issue: The LX3310 may produce a strong exhaust gas smell during certain working conditions.

Solution: If the above issue occurs, install the appropriate heater relay kit.

Parts Information: Part Number, Description, Quantity, & Remarks
6C810-99712 RELAY,KIT(HEATER,BH) 1 ROPS
6C830-99713 RELAY,KIT(HEATER,BHQ) 1 CAB

Warrenty covers parts & installation for 5 Years from the retail date.
 
  • Like
Reactions: 1 user

Old Machinist

Well-known member

Equipment
Kubota LX3310 cab, JD 4310, NH 575E cab backhoe, JD F725, Swisher 60", etc.
May 27, 2024
258
267
63
NE FL
Have you mentioned this concern to your dealer? If so, they should have informed you of this TSB to rectify the situation.

TSB-2022-035-E-R2 June 27, 2022 Revised: February 13, 2023

FIX AS FAIL EXTENSION: B-Series; LX3310 Strong Exhaust Gas Smell
Repairs described in this bulletin may be made only in the event of a failure.
KOBD ACE must be used when installing the kit.


Product Line: B-Series Model: LX3310 Serial Numbers Affected: Model Serial Numbers LX3310 ROPS, LX3310 CAB 10001 to 14735

Issue: The LX3310 may produce a strong exhaust gas smell during certain working conditions.

Solution: If the above issue occurs, install the appropriate heater relay kit.

Parts Information: Part Number, Description, Quantity, & Remarks
6C810-99712 RELAY,KIT(HEATER,BH) 1 ROPS
6C830-99713 RELAY,KIT(HEATER,BHQ) 1 CAB

Warrenty covers parts & installation for 5 Years from the retail date.
THANKS!

I have all of the LX3310 TSBs but didn't connect the dots on this one. For some reason it has stopped smelling bad but I will keep this in mind if it starts up again. My serial number is within the range listed on this one.

I just had the jerky motion TSB performed and it made the tractor much more enjoyable to operate.
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
3,059
1,505
113
Kansas City, KS
THANKS!

I have all of the LX3310 TSBs but didn't connect the dots on this one. For some reason it has stopped smelling bad but I will keep this in mind if it starts up again. My serial number is within the range listed on this one.

I just had the jerky motion TSB performed and it made the tractor much more enjoyable to operate.

The TSB is only good for 5 years from your purchase date.
It includes a larger alternator and a new starter.
 
  • Like
Reactions: 1 user

Like Tractors

Active member

Equipment
Several Kubotas
Jan 1, 2020
83
106
33
Eastern Iowa
THANKS!

I have all of the LX3310 TSBs but didn't connect the dots on this one. For some reason it has stopped smelling bad but I will keep this in mind if it starts up again. My serial number is within the range listed on this one.

I just had the jerky motion TSB performed and it made the tractor much more enjoyable to operate.
What was the fix for the herky jerky motion? I had dealt with that on my B2650 since I bought it in 2019, there was mention of a spring change to the neutral valves, I tried that and it just delayed when the herky jerky motion occured. A couple weeks ago it pissed me off for the last time, I am either going to cure this or trade that son of a bitch off.
 

Old Machinist

Well-known member

Equipment
Kubota LX3310 cab, JD 4310, NH 575E cab backhoe, JD F725, Swisher 60", etc.
May 27, 2024
258
267
63
NE FL
What was the fix for the herky jerky motion? I had dealt with that on my B2650 since I bought it in 2019, there was mention of a spring change to the neutral valves, I tried that and it just delayed when the herky jerky motion occured. A couple weeks ago it pissed me off for the last time, I am either going to cure this or trade that son of a bitch off.
TSB-2023-044-E-R1 replaces 3 pressure relief valves in the transmission. Your B2650 was included but you are probably out of the coverage timeline. They only cover it for 5 years after the in service date.

IF you ever reported the problem to a dealer and have record of it you might get them to ask for some retro coverage?
 

Like Tractors

Active member

Equipment
Several Kubotas
Jan 1, 2020
83
106
33
Eastern Iowa
TSB-2023-044-E-R1 replaces 3 pressure relief valves in the transmission. Your B2650 was included but you are probably out of the coverage timeline. They only cover it for 5 years after the in service date.

IF you ever reported the problem to a dealer and have record of it you might get them to ask for some retro coverage?
Thanks for the TSB number, I am not concerned about the issue being covered under warranty, I just want to know if there is a company engineered fix for the problem. I asked my friendly Kubota dealer last week, and they were not aware of any concerns about that problem or bulletins.

I will search for the bulletin, in the mean time I cured the problem by reducing the neutral valve spring force by 95%, that thing is perfectly smooth now! I see that the LX2620 no longer uses the neutral valves.